Wire-wound design can be prepared 160 micron wet film thickness, corrosion resistant stainless steel material, suitable for high viscosity test and not easy to block, longer service life.
Wire-wound structure design, wet film thickness 160 microns, suitable for high viscosity test is not easy to block, 303 stainless steel material corrosion resistance, longer service life.
Measurement range of 50~ 7600 μm, error +/- 3%, suitable for thick soft coatings such as polyurea and asphalt neoprene, providing accurate thickness detection.
Wire-wound design to achieve 171.5 micron wet film thickness, stainless steel corrosion resistance and not easy to break wire, application width 300mm to ensure uniform coating, suitable for thick film preparatory needs.
Using eddy Current thickness measurement principle, equipped with ultra-thick coating special Probe, Measurement range 0~ 13000 μm, error +/- 3%, can read more than 180 data per minute, support 250,000 Measured value storage.
The split structure is equipped with a dedicated thick coating Probe, Measurement range of 0~ 13000 μm, accuracy +/- 3%, IP65 Protection Rating and high-speed measurement capability of more than 60 readings per minute.
Spreader formed process to ensure uniform, wear-resistant and corrosion-resistant stainless steel easy to clean, provide 230 μ m wet film thickness and 300mm application width, suitable for thick film experimental needs.
Measurement of thick soft coatings such as polyurea and asphalt, thickness range 50 to 7600 μm, storage of 100,000 readings, ASTM D6132 compliant, non-destructive ultrasonic technology, durable and easy to operate.
The formed process is used to achieve 300 micron wet film thickness, the total length of 400mm is equipped with a 50mm hand-held area for direct operation, and the stainless steel material ensures Abrasion Resistance and anti-corrosion performance to meet the needs of thick film experiments.
The device uses 20.70ml pump volume and 2kg weight load, which can accurately measure the flow spread diffusion diaMeter of the sample under fixed pressure, ensuring the consistency test, repeability and accuracy.
The formed pRoduction process ensures uniform film, wet film thickness of 110μm, total length 250mm with 250mm application width, 304 stainless steel material provides durability and accurate Spreader effect.
Wire-wound design to achieve 171.5 μm wet film thickness, stainless steel corrosion resistance and strong structure, application width 300mm to ensure uniform film formation.
Stainless steel material acid and alkali erosion, ensure Spreader uniformity; wet film thickness 50μm with 100mm application width, precise control of Coating thickness, improve Test Reliability.
Stainless steel material resists acid and alkali erosion to ensure long-term use Stability; can precisely control 75 μm wet film thickness, provide uniform Spreader effect, and meet the laboratory's High Accuracy requirements for sample thickness.
Spreader formed process to ensure uniform, wet film thickness of 80 microns, diaMeter 10mm design and stable operation, 304 stainless steel material durable and unbroken wire, easy cleaning and maintenance.
