Adopt D/8 lighting observation conditions, the measurement diaMeter is Φ 10mm, and the spectral reflectance Repeatability Standard Deviation is within 0.08%. It has camera framing and automatic Gloss compensation technology to ensure measurement accuracy.
Adopt arc reciprocating motion mode, provide four adjustable speeds (21-106rpm) and 2lb/4lb friction load, support 0-999999 automatic shutdown tests, suitable for Abrasion Resistance evaluation.
The large diaMeter design is used to facilitate sample pouring in and out, the inner wall arc transition is easy to clean, and the accuracy is controlled within 0.2% to ensure reliable measurement results.
Using aluminum alloy material, the accuracy is controlled within 0.2%, the inner wall arc transition is easy to clean, and the lid small hole design can overflow excess samples to avoid bubbles and improve the test accuracy.
Adopt mirror stainless steel argon arc welding box, Temperature range 10~ 200 ℃, Temperature Uniformity +/- 3%, equipped with microcomputer P.I.D temperature controller and hot air circulation system, can adjust the intake and exhaust volume.
Mirror stainless steel argon arc welding box, temperature control accuracy +/- 1.0 ℃, hot air circulation system to improve Temperature Uniformity, can adjust the air intake and exhaust volume, support multi-stage programmable control and independent temperature limit alarm.
With four Illuminant automatic switching function, display the use time of each Illuminant, no need to warm up without flashing, Color temperature range covers 2700K to 6500K, low energy consumption without heating, support Metamerism detection.
With six Illuminant automatic switching function, no need to warm up without flashing, low energy consumption without heating, display the use time of each Illuminant, support Metamerism detection, Color temperature coverage 2700K to 6500K
Frequency 7MHz, Probe diaMeter 6mm, can be measured thin-walled and small arc surface, minimum pipe diaMeter Φ 15mm, Measurement range 0.75-80 mm, suitable for different environmental conditions.
Impact specimens with specified weight steel balls falling freely from a set height can evaluate the resistance to rapid deformation of materials or coatings, and are suitable for testing a variety of substrates.
With five Illuminant system, Color temperature coverage 2700K to 6500K, no need to warm up without flashing, automatic switching Illuminant and display the use time, low energy consumption without heating, support Metamerism function.
The dual-station design can simultaneously carry out two sample tests, the friction speed is 30CPM, the friction hammer load is 200g, and it has the power-off memory function to support dry and wet friction and organic solvent friction test.
The mirror stainless steel argon arc welding box is used, the microcomputer P.I.D temperature controller has accurate temperature control, and the hot air circulation system improves the Temperature Uniformity. Temperature range RT + 10~ 200 ℃, volume 1000L.
MCU chip to achieve low power consumption operation, equipped with intelligent Sensor to ensure detection accuracy ≤ +/- 3% F. S, Response Time ≤ 30S, support 4-20mA, RS485 and wireless signal output, can be operated by remote control without opening the lid, with local sound and light alarm and remote monitoring capabilities.
Light spectrum analysis technology using dual optical path, equipped with pulse xenon arc and LED dual Illuminant, support SCI + SCE simultaneous measurement, Measurement time is less than 4 seconds, with temperature and Humidity calculation compensation function.
