Adopt ultra-low power consumption single chip standby for more than 6 months, imported high luminance Illuminant to ensure repeability +/- 1% F.S., IP65 protection and 0.01NTU resolution, support USB connection and data storage.
Using ultra-low power consumption single chip standby for up to 6 months, equipped with imported high stability Optical inspection system to achieve +/- 1% F. S Accuracy, IP65 protection design to ensure harsh environment reliability.
Adopt stepper motor direct drive to ensure accurate speed, equipped with RTD temperature probe real-time monitoring, Measurement accuracy of +/- 1% F. S, with ultra-low viscosity adapter to extend Measurement range to 1mPa · s.
Using ultra-low power 16-bit microcontroller, standby time can reach more than 6 months; measurement range 0~ 1000NTU, repeability +/- 2% F.S; Equipped with imported high-luminance Illuminant and cold Illuminant narrow-band interference Optical inspection system to ensure Optical inspection stability; Molded ABS case, IP65 design, anti-corrosion, waterproof and dustproof.
The lower limit of measurement can be up to 1mPa · s, the sample volume is only 30ml, the rotor is easy to load and unload and the running state can be observed, which is convenient for cleaning and detailed analysis of rheological characteristics.
Viscosity range 0.6~ 6000000mPa · s, repRoducibility +/- 0.5% F. S, supports continuously variable speed and liquid crystal display of various paraMeters, suitable for ultra-low viscosity sample measurement.
The stainless steel inner box is used to ensure non-adsorption formaldehyde, the background concentration is as low as 0.006mg/m ³ and the holding time is long; Temperature range 15-40 ℃ accuracy +/- 0.5 ℃, humidity range 30-80% RH accuracy +/- 3%; low failure rate, the average initial maintenance interval exceeds 3 years.
Adopt 16-bit microcomputer processor and stepper motor drive to achieve continuously variable speed of 0.1~ 200rpm; standard L0 ultra-low viscosity adapter, only 25~ 30mL sample can accurately measure ultra-low viscosity, repRoducibility up to +/- 0.5% F.S.
Equipped with an ultra-low viscosity adapter, the viscosity test is as low as 1cp, the sample volume is only 25~ 30mL, repRoducibility +/- 0.5% F. S, Measurement +/- 1% F. S, support stepless speed control.
Dedicated to 0.1~ 10mPa · s ultra-low viscosity liquid measurement, the sample volume is only 25ml, the cylinder rotor design can accurately calculate the shear rate, easy to sample detailed analysis.
Measurement range 0-2μS/cm, suitable for ultra-low conductivity medium, support temperature compensation and a variety of installation scenarios to ensure Data Reliability.
Microcomputer drive technology and imported stepper motor to ensure smooth speed, measurement accuracy of +/- 1% F. S, repRoducibility +/- 0.5% F. S, with automatic scanning function to help choose the right Rotor speed, with ultra-low viscosity adapter to support viscosity measurement as low as 1cP.
Adopting a 16-bit microcomputer processor and a stepper motor high-subdivision drive, it realizes a stepless speed change of 0.1 to 200rpm, is equipped with an ultra-low viscosity adapter, and the sample volume is only 25 to 30mL, with a repRoducibility of +/- 0.5% F.S.
Using stepper motor direct drive to ensure accurate speed, Measurement range 1~ 2000000mPa · s, with RS232 interface and RTD temperature probe, support ultra low viscosity liquid measurement.
Adopt stainless steel mirror liner and ultra-fine fiberglass insulation, Temperature Fluctuation ≤ +/- 0.5 ℃, uniformity ≤ +/- 2 ℃, equipped with large screen Touchscreen and automatic calculation function, improve temperature and humidity control accuracy and operation convenience.
