Using Slot-die Spreader technology, the thickness range of Spreader is 0.005-3mm, the bonding speed is 1~ 10m/min, and the drying temperature can reach 200 ° C. It is suitable for a variety of non-elastic materials to achieve accurate Spreader and efficient compounding.
Slot-die Spreader technology implementation of 0.005-3mm thickness precision control, composite roller heating temperature up to 200 ℃ to ensure firm gluing, equipped with 1 Meter drying tunnel and stepping motor to achieve 1-10m/min stable operation.
Slot-die Spreader technology implementation of 0.005-3mm thickness range of precision Spreader, composite roller heating temperature up to 200 ℃ to ensure firm gluing, servo motor control to achieve 0.001-10m/min stepless speed regulation, equipped with 1 Meter drying tunnel to achieve efficient drying curing.
Slot-die Spreader and gravure coating dual function design, Spreader thickness range of 0.005-3mm, drying temperature up to 200 ℃, bonding accuracy of 0.5mm, suitable for a variety of non-elastic materials stable composite and Spreader processing.
Using slot-die coating method, application width ≤ 500mm, thickness range 10-250μm; equipped with automatic deviation correction and constant tension system, Oven temperature RT +~ 160 ℃, support segmented thermostatic, ensure Spreader accuracy +/- 3 microns.
Spreader thickness accuracy of +/- 0.003mm, adjustable rate of 5~ 200mm/s, support Vacuum chuck and heating to 180 ℃, suitable for a variety of substrates and laboratory environments.
Spreader thickness range of 10-250μm, Dry-Film accuracy of +/- 3 microns, equipped with automatic constant tension control and four Oven section thermostatic, ensure uniform and stable Spreader, Oven with waste heat recovery system energy saving about 30%.
Spreader accuracy of +/- 0.003mm, support 5~ 180mm/s stepless speed, Heating Temperature range RT +~ 200 ℃, suitable for a variety of substrate Spreader experiments.
Spreader Film thickness accuracy of +/- 0.003mm, Spreader rate of 5~ 180mm/s adjustable, supports a variety of Spreader processes and substrates, can work in the glove box, to meet the laboratory R & D request.
Response speed is improved with ARM processor, Measurement range 10-1000mN, accuracy +/- 1%, equipped with four-speed adjustable slot-die 5-20mm, support sudden power failure data saving and real-time pressure Linear dispersion display function.
The four-guide column structure is adopted to ensure smooth sliding and high accuracy, the knife die life is ≥ 30,000 times and there is no burr Linting defect, the maximum punching size is 100mmx140mm, and the volume is small and safe to operate.
With bar and Drawdown blade two Spreader mode, using clamshell Drawdown blade head and new bar Installation method, easy to clean. Spreader speed and length can be freely adjusted, film thickness control accuracy is high, suitable for Glass, cardboard and other substrates.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Aluminum die-casting ceramic coating working plate is resistant to abrasion and corrosion, the highest temperature is 350 ° C, the temperature control accuracy is +/- 0.2 ° C, the DC brushless motor runs smoothly with low noise, and the double heating control circuit ensures temperature stability.
Adopt High Accuracy Modular Spreader Station, all-electric control without external air source, Spreader thickness can reach a minimum of 0.01mm, maximum Spreader width of 300mm, and equipped with quick-release plastic slot for easy cleaning and maintenance.
