The use of low-speed intermittent barrel edge mixing, L-shaped paddle mixing design can be completed in five minutes uniform mixing, Speed range 0~ 60rpm, mixing process inks do not heat up, clean simple.
The precision blade combination ensures that the edge of the sample is flat, and can cut 152 × 12.7mm annular pressure samples and (200~ 250) × 15mm tensile samples, with a volume of 670 × 450 × 470mm and a weight of 35kg.
The precision blade combination ensures that the edge of the specimen is flat, and 152 * 12.7mm annular compression specimens and (200~ 250) * 15mm tensile specimens can be cut, meeting TAPPI-T409 and JIS-P8113 standards.
The four-blade structure makes the mixed medium flow radially up and down, forming strong turbulence and high shear force. The diaMeter of the 150mm paddle is suitable for medium and high viscosity liquids, which can effectively crush the particles in the liquid.
Mixing method of low speed intermittent sticking barrel edge, L-type paddle mixing design makes inks flip and cut, mixing evenly within five minutes without heating up, Speed range 0~ 60rpm, transmission mode is direct transmission to reduce power loss.
Mixing method, L-shaped integral forming Impeller without screw hole easy to clean, Speed range 0~ 60rpm, direct drive to reduce power loss, can set the mixing time and equipped with moving pulley.
The blade width is 140mm and the Rod length is 800mm, which pRoduces tangential flow to form a high shear rate, which is suitable for polymer reaction and mineral dispersion, and effectively prevents medium deposition.
It can cut 32.2cm ² and 64.5cm ² samples, the sampling error is less than 0.5cm ², and the maximum sampling thickness is 15mm, which meets the accurate sampling requirements of Corrugated Board Flat Crush Test.
Force range 5~ 3000N, accuracy +/- 1%, support ring pressure, side pressure, gluing, flat pressure and other 6 tests, equipped with 5.0 Touchscreen and thermal printer, suitable for paper Cardboard strength detection.
Support bar and drawdown blade two coating methods, coating speed 5~ 180mm/s, heating temperature up to 180 ℃, Vacuum chuck to ensure that the substrate is flat, to meet the needs of precision Spreader.
Optical inspection system and Modular design, equipped with flat-field color difference elimination fluorescent objective, fretting grid value of 2 μ m, support multi-band fluorescent filter group, comfortable operation.
High Accuracy Observation and Analysis of Birefringent Substances with Stress-free Flat Field Objectives and Large Field Eyepieces, Fretting Grid of 2 μ m, Rotating Stage and Transmission Reflection Illumination.
Optical inspection system with infinite distance, equipped with flat-field color difference eliminating fluorescent objective, fretting grid value of 2 μ m, coarse fretting coaxial focusing, support for a variety of fluorescent filter sets, suitable for low-illumination microscopic image shooting.
Using long distance flat field color difference elimination objective, fretting grid value of 2 μ m, equipped with three eyepiece barrel can switch normal and polarized observation, built-in field of view light bar and color filter system.
Using bar and Drawdown blade double coating method, Spreader thickness range 0~ 10mm, accuracy of 0.001mm, coating speed 5~ 180mm/s, Glass countertop to ensure flat, support stepless speed change and custom function.
