The impact speed is 3.5m/s, the impact energy can be selected from 1J, 2.75J, 5.5J, and the pendulum lift angle is 150 °. It supports a variety of non-metallic material impact tests and is easy to operate.
High Accuracy swirl/spin encoder is used to collect the pendulum angle and speed, the angle resolution reaches 0.075 °, the wind resistance error is automatically corrected, the Impact speed is 2.9m/s, the pendulum energy can be selected from 2J to 5J, and the intelligent control automatically calculates the results and saves the test data for many times.
With an impact speed of 2.9m/s or 3.8m/s, it supports a variety of sample sizes, uses semi-automatic control to improve operation efficiency, and can display information in real time and print out the results.
High Accuracy swirl/spin encoder is used to collect angle and speed information, the angle resolution reaches 0.075 °, the wind resistance error is automatically corrected, the Impact speed is 3.8m/s, the pendulum energy can be selected from 7.5J to 50J, and the automatic calculation result is intelligently controlled.
Impact-free using high-strength carbon fiber swing bar, equipped with high-resolution digital encoder to ensure angle accuracy of 0.01 °, automatically calculate and save 24 sets of data, support multi-unit output and built-in printing function.
Using 32-bit ARM processor and 24-bit AD acquisition, Sampling rate 500 times/second, displacement resolution 0.0005mm, support multiple closed-loop control and rich interface expansion.
Using stepper motor drive and high rigidity portal frame structure, Force Indication Error ≤ +/- 0.5%, effective Travel 1000mm, support multiple test modes and automatic calculation functions to ensure High Accuracy and Reliability.
Adopt stepper motor drive and portal frame structure, range 50KN, accuracy +/- 0.5%, support a variety of test modes such as tensile compression and bending test, automatic calculation and save data.
Using stepper motor drive and high rigidity portal frame, range 30KN, accuracy +/- 0.5%, support multiple unit settings and 10 specimen automatic calculation, provide overload protection and multiple test modes.
Using stepper motor drive and high rigidity portal frame structure, the maximum range is 20KN, the accuracy is +/- 0.5%, it supports 10 samples automatic calculation and 10,000 data storage, and has overload protection and various test modes.
Using stepper motor drive and high rigidity portal frame, the range is 20KN, the accuracy is +/- 0.5%, it supports a variety of test modes such as tensile compression and bending test, and can automatically calculate and save 10,000 data.
Impact speed 3.5m/s, cantilever beam impact energy 11J, semi-automatic control to improve operating efficiency, dedicated LCD screen real-time display of information, support printing output.
Temperature range RT +~ 300 ℃, heating rate 120 ℃/h or 50 ℃/h, maximum deformation Measurement range 1mm, support thermal deformation and Vicat test, real-time display and alarm function.
Using single chip control technology, the impact height can be preset and automatically positioned, the accuracy is up to +/- 1mm, and the secondary impact can be automatically prevented. The mass range of the hammer body is 0.25-15 kg, and the two test methods of passing method and layer method are supported.
Adopting semi-automatic control, the operation is simple and efficient; the impact speed is 3.5m/s, and the impact energy of the cantilever beam is 2.75J and 5.5J; the dedicated LCD screen displays data in real time, and the test results can be printed out.
