Temperature range RT + 10~ 300 ℃, Temperature Fluctuation +/- 1 ℃, stainless steel liner corrosion resistance, electric heating tube heating fast and uniform, intelligent digital display easy to operate.
Vacuum heating drying technology, Vacuum Level up to -0.098MPa, pumping 80-120 liters/min, drying time is only 4-6 minutes, with intelligent PID temperature control and over-temperature alarm function, easy and safe operation.
High Accuracy Platinum Resistance Sensor is used to realize +/- 1 ℃ temperature fluctuation, with 9999 minutes timing function, three-layer tempered Glass observation window design to ensure safe and clear observation, suitable for vacuum drying environment of thermally sensitive substances for easy analysis.
Internal heating technology shortens the heating time by 50%, the vacuum environment can be reduced to 133Pa, the aluminum shelf conducts heat quickly and reduces heat loss, double-decked Glass doors are easy to observe, and support inert gas protection to prevent oxidation.
The digital vacuum Gauge is used to automatically control the Vacuum Level, with an accuracy of +/- 1%; the heating element is located in the Shelf of the box to shorten the heating time by 50%; the special aluminum shelf conducts heat quickly and does not oxidize at high temperature, effectively improving the drying efficiency.
With programmed vacuum cycle control, the maximum number of cycles is 99 times, and the drying time is shortened by more than 50% compared with the traditional method; equipped with a digital vacuum Gauge, the control accuracy is +/- 1% to ensure a stable vacuum environment.
Internal heating design shortens heating time by 50%, vacuum environment can quickly dry heat sensitive substances and avoid oxidation, Studio Temperature Fluctuation +/- 1 ℃, equipped with tempered Glass door for easy observation.
Equipped with programmed vacuum cycle function, drying time is shortened by more than 50%, temperature control accuracy +/- 1 ℃, support 7 groups of 63-step Program settings, digital Vacuum Level control accuracy +/- 1%.
Temperature range RT + 10~ 300 ℃, Temperature Fluctuation +/- 1 ℃, volume 140L, equipped with observation window and intelligent digital display to ensure uniform heating and precise control.
Cuboid Studio improves volume utilization, drying time is reduced by more than 40% compared with traditional Vacuum Chamber, Temperature range RT + 10~ 200 ℃, Vacuum Level up to 133Pa, double-decked Glass door is easy to observe.
Microcomputer P.I.D temperature controller, temperature control accuracy +/- 1.0 ℃, volume 136L, with hot air circulation system to improve Temperature Uniformity, support independent temperature limit alarm and optional programming function.
Double station design can process two samples at the same time, Vacuum Level up to -0.098MPa, drying time only 4-6 minutes, suitable for rapid drying of wet paper samples with a diaMeter of no more than 200mm.
The vacuum environment effectively reduces the boiling point of the liquid and prevents the analysis of heat-sensitive substances; the Vacuum Level < 133Pa ensures efficient drying; the microcomputer PID control realizes accurate temperature control; the multi-layer independent heating system makes the temperature distribution more uniform.
Vacuum environment significantly reduces the boiling point of liquid, suitable for heat-sensitive substances; drying Temperature range RT + 50~ 200 ℃, Vacuum Level < 133Pa; inert conditions prevent oxide explosion, powder sample stability does not move.
Temperature range RT + 10~ 300 ℃, Temperature Fluctuation +/- 1 ℃, equipped with intelligent digital display and observation window, uniform and stable heating, suitable for a variety of material drying needs.
