Adopt dual-axis constant force lifting system, lift Travel 200mm, speed range 60-8000rpm, digital direct display Rotation speed, equipped with dispersed impeller and sand grinding disc, adapt to different experimental needs.
Adopting spiral trapezoidal screw, it has the characteristics of manual operation, simple stability, vertical and lying dual-use, the maximum load is 500N, and the tensile force is Travel 200mm. It is suitable for tensile and compressive load, insertion and unplugging force, and failure test.
Adopt dual-axis constant force lifting system, lifting Travel 400mm; Rotation speed up to 8000rpm, linear speed up to 41m/s; High-speed dispersion disc generates strong shear force to achieve uniform dispersion and suspension effect of materials.
Adopt trapezoidal screw drive and integral nut design, rated load 500N, Travel 150mm, can be firmly clamped to prevent partial load, fast loading and unloading to improve measurement accuracy, vertical and horizontal dual-use to adapt to a variety of test scenarios.
With a wide range of 0-2800rpm speed regulation and 250mm automatic lifting Travel, the dual-axis constant force system is used to achieve smooth lifting, and the integrated sand disc and dispersion disc meet a variety of process requirements.
Speed range 60~ 8000rpm, Power 550W, using variable frequency motor to achieve stepless speed regulation, digital direct display Rotation speed, dual-axis constant force lifting system is easy to operate, low noise and no interference.
Using handwheel swirl/spin screw to control displacement, smooth operation and simple operation, rated load 500N, Test Travel 0~ 200mm, vertical horizontal dual-use design for easy installation and use.
Adopt trapezoidal screw drive, rated load 500N, Travel 150mm, with manual operation, simple and stable, vertical lying dual-use and other characteristics, suitable for tensile and compressive load and failure test.
Using formed process, wet film thickness 35 microns, application width 400mm, continuous wire, uniform film and good repRoducibility, easy to clean after the experiment.
The equipment integrates dispersion and stirring functions, lifting Travel 250mm, with a maximum processing viscosity of 100000mPa.s. It adopts a dual-axis constant force lifting structure, resulting in stable operation and uniform mixing.
It adopts trapezoidal screw drive and side handwheel loading mode, which is stable and easy to operate. It is equipped with a mobile base platform, which can realize free movement of front, rear, left and right. The rated load is 500N, and the Test Travel is up to 250mm, which meets a variety of mechanical testing requirements.
Set dispersion and stirring functions in one, lifting Travel 250mm, speed range 100~ 8000rpm, dual-axis constant force lifting to ensure stable operation, processing viscosity up to 100000mPa.s.
Equipped with a digital ruler to collect displacement data, the resolution is up to 0.01mm, the maximum measurement load is 500N, the base has a mobile platform for easy installation of fixtures, and the side handwheel is easy to load and operate.
Measurement range 0-12.7 mm, resolution 0.001mm, with electric swirl/spin, automatic statistical extreme deviation, multi-level account management and test result audit traceability.
Three-axis linkage automatic precision control, intelligent cutting can change the amount of feed according to the hardness of materials, the maximum cutting section is 100 × 100mm, equipped with mobile magnetic filtrate circulating water Tank and fully enclosed safety structure.
