35Mm cross-cut length and 1mm pitch design, stainless steel material to ensure dimensional accuracy, equipped with tape and brush for film adhesion testing.
Made of 304 stainless steel, with a cross-cut length of 23-35mm, it provides four spacings of 1-3mm and 7/11 cross-cut numbers to meet different standard testing requirements.
35Mm cross-cut length with 6 teeth design, 3mm precise spacing to ensure test accuracy, 304 stainless steel material to ensure durability, equipped with tape and brush complete set.
35Mm cross-cut length with 11 teeth design, 1.5mm precise spacing to ensure test accuracy, 304 stainless steel material to ensure durability, equipped with tape and nylon brush to complete the complete test process.
35Mm cross-cut length with 2mm spacing design, 11 teeth to ensure test accuracy, 304 stainless steel material to ensure durability, suitable for film adhesion evaluation.
Set cross-cut adhesion, film thickness and Buchholz Crowd Hardness three test functions in one, cross-cut knife 6 blade spacing 1mm/2mm, Crowd knife load 500 +/- 5g, using the destruction Measurement principle.
Hardness High Abrasion Resistance, cutting speed 20-50mm/s, suitable for film thickness 0~ 60μm, Handheld design is convenient for laboratory and field use.
Vacuum hardened stainless steel material, cutting depth can be accurately adjusted, weight only 352g easy to carry, suitable for different film thickness and substrate adhesion testing.
Equipped with 1mm and 2mm cutter head spacing, the number of cutter teeth is 11, which can meet the needs of different paint film thickness testing, easy to operate and in line with international standards.
The adhesive force of the tape is 4.3N/cm, and the principle of cross-cut method is adopted, which is suitable for adhesion testing. The performance is stable and non-degumming, and the test results are accurate and reliable.
Manual design, equipped with a 6-tooth cutting knife, with a 1mm and 2mm tooth spacing, in line with ISO2409 standards, suitable for adhesion testing in laboratories and construction sites.
The circular cutter is designed with eight incisions and 1mm spacing between the teeth. It is suitable for strong substrate adhesion testing with a Coating thickness of less than 60 microns and meets the requirements of ISO 2409.
The number of teeth is 6 teeth, the spacing is 2mm, and the multi-cutter surface circumference and multi-faceted design is adopted, which has a long service life and is suitable for 60 to 120μm hard substrate samples.
Tack is good and non-degumming, adhesion reaches 7.6 N/cm, mass performance is stable, suitable for cross-cut adhesion testing, to ensure accurate film integrity assessment.
Provide 1mm, 2mm, 3mm three kinds of tooth spacing, suitable for different film thickness test, in line with ISO2409-1974 standard, 6 teeth design to ensure uniform cutting.
