Using positive pressure test principle, Measurement range 0~ 1.6MPa, fully automatic operation, support three test modes, built-in calibrating program, suitable for quantitative measurement of various sealing performance indicators.
The fully automatic electronically controlled hydraulic pump provides smooth and continuous pulling force with +/- 1% accuracy, built-in rechargeable battery supports 200 tests, and IP65 Protection Rating ensures durability.
Test method to achieve tensile compression test, Accuracy grade 1, equipped with 7-inch touch screen display tensile curve, support 50 kinds of fixtures to meet more than 1000 material testing needs.
Measurement accuracy +/- 1%, force value resolution 1/200000, with breakpoint ratio 0~ 99% adjustable function, support tensile, tensile shear, tear and other mechanical properties test, with Travel limit and overload protection.
Adopt ball bearing drive and imported motor, with low noise and accurate control; 0~ 1000N force range, adjustable tensile speed from 1 to 399mm/min; support sample size flexible adjustment, with automatic reset and overload protection functions.
Using ball bearing drive and imported motor, Measurement accuracy up to +/- 1%, tensile speed 1-399mm/min adjustable, support sample size flexible adjustment and automatic data statistics function.
Using ball bearing drive and imported motor, Measurement range 0-30N accuracy of 0.01N, tensile speed 1-399mm/min adjustable, support sample size flexible adjustment and automatic data statistics.
Adopt Pneumatic Automatic Clamping Mode, Adjustable Clamping Pressure 0.2-0.7Mpa, Equipped with Rapid Sensing Protection Device and Precision Ball Screw, Ensure Test Stability and Convenience of Operation.
Tensile Strength and elongation paraMeters can be detected, test force 500-3000N optional, accuracy +/- 1%, stepless speed 1-500mm/min, suitable for all kinds of paper and Cardboard materials.
Pneumatic fixture to achieve automatic clamping, no manual operation; Measurement range covers 10~ 16000mN, support a variety of sheet material Tear strength detection, equipped with 3.2 inch LCD display and thermal printer.
Adopt stepper motor and High Accuracy encoder to ensure mechanical stability and High Accuracy, with force value maintenance, set force value round-trip motion and pull and break stop function, support four test modes and fully automatic programming, equipped with 7-inch Touchscreen and host computer software for Data analysis.
Fully enclosed metal Furnace body to enhance Baseline Stability, with imported alloy Sensor to enhance corrosion resistance; Temperature range covering room temperature to 600 ℃, support 0.1~ 100 ℃/min program temperature control, with 0.001 ℃ resolution and Automatic calibration function.
Featuring a Cotex-M4 ARM processor, it employs pneumatic sample clamping and an integrated weighing mechanism to achieve fully automated measurement. The oscillation frequency is adjustable from 50 to 200 times per minute, with a weighing resolution of up to 0.001g.
Using ball screw and 3 guide shaft drive mechanism, Measurement range 0-1000N, support a variety of sample size and tensile speed adjustment, built-in thermal printer and RS232 Communication interface.
Adopt ball screw drive to ensure smooth and accurate operation, Precision force value of +/- 1%, integrated tensile, disbonding, tearing and other test procedures, support 0.05~ 500mm/min speed range, automatic shutdown protection.
