It can be used with Force Gauge for vertical and horizontal testing, suitable for accurate measurement of thrust or tension, stable structure and easy operation.
Adopt electromagnetic force closed-loop measurement system, Measurement range 0-400mN/m, resolution +/- 0.1mN/m, automatically read equilibrate value, support high viscosity liquid and interfacial tension test, simple operation without external computer control.
Measurement accuracy of +/- 1.5% using three-wheel Tension Measurement principle, 62 samples per second, supports automatic conversion of four force units, and can display current value, MAX Maximum, peak value and MIN Minimum at the same time.
Hollow cylinder center aperture 65mm, maximum tension 600KN, manual pump high voltage 63Mpa, digital pressure Gauge direct reading tension value, compact structure and easy to carry.
Using stepper motor and High Accuracy encoder, Mechanical Property stability accuracy is high, the speed range is 10-800mm/min, the displacement accuracy ≤ +/- 0.1mm, with force holding and tension breaking stop function, support a variety of test modes.
Adopt electromagnetic force closed-loop measurement system, accuracy +/- 0.02mN/m, support 0-200mN/m range measurement, with automatic lifting and temperature detection functions, can test high viscosity liquids and dynamic surface tension changes.
Stepping Motor and High Accuracy Encoder, High Mechanical Property Stability accuracy, Maximum measurement value of 2000N, Speed range of 10-800mm/min, with force holding and tension breaking stop function, Support independent programming to meet different test needs.
High Accuracy Sensor with 500N Maximum Measured value and 0.1N Graduation supports Data storage, automatic unit conversion and sound and light alarm. Linear dispersion test and machine linkage control can be realized through serial connection.
Measurement principle of three rounds of tension, 62 measurements per second, accuracy +/- 1.5%, support a variety of unit conversion and automatic shutdown, optional USB or Bluetooth data output.
Measurement principle using three rounds of tension, accuracy +/- 1.5%, 62 measurements per second, support current value, MAX Maximum, peak, MIN Minimum display, optional USB or Bluetooth data output, automatic shutdown function.
Measurement principle using three rounds of tension, Measurement range 0~ 50kgf, accuracy +/- 1.5%, 62 measurements per second, support USB and Bluetooth data output.
Measurement principle using three rounds of tension, accuracy +/- 1.5%, 62 measurements per second, support current value, MAX Maximum, peak and MIN Minimum display, suitable for high-speed running materials.
Dial indicator reading is accurate, with dual unit display without conversion, maximum Measured value 100N, Indication Error +/- 1%, can freely switch peak holding and real-time load value, suitable for all kinds of fixture installation.
High Accuracy measurement with 0.5% Relative Indication Error and 0.001N Graduation, support gravity acceleration setting, upper and lower limit alarm and 100 sets of data storage analysis, equipped with USB communication function to display force value Linear dispersion and table.
Measurement principle using three rounds of tension, accuracy of +/- 1.5%, 62 measurements per second, support multi-unit automatic conversion and peak recording, optional USB or Bluetooth data output, suitable for dynamic or static material inspection.
