The use of low-speed intermittent barrel edge mixing, L-shaped paddle mixing design can be completed in five minutes uniform mixing, Speed range 0~ 60rpm, mixing process inks do not heat up, clean simple.
The device can be prepared with 12 wet film thicknesses, ranging from 30-600μm, accuracy up to +/- 002-0.012 mm, 4-sided design to ensure that the coating does not spill, suitable for a variety of substrate surface Spreaders.
4-Sided wet-film Spreader design, application width 160mm, accuracy +/- 2μm, high Hardness stainless steel material, Hardness 50~ 55HRC, to ensure experimental accuracy and durability.
4-Sided film design can be prepared at the same time four thickness, accuracy control within +/- 2μm, high Hardness stainless steel material to ensure Abrasion Resistance and corrosion resistance, effective application width 80mm.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
The four-blade structure makes the mixed medium flow radially up and down, forming strong turbulence and high shear force. The diaMeter of the 150mm paddle is suitable for medium and high viscosity liquids, which can effectively crush the particles in the liquid.
4-Sided frame design, provide 30/50/75/100μm variety of film thickness selection, application width 80mm, stainless steel corrosion resistance, in line with GB/T 1727 standard, to ensure uniform film.
Driven by brushless DC motor, Max. stirring Capacity up to 10 liters, stirring speed range of 150-2000rpm, with super stirring force, suitable for high viscosity liquid stirring.
Mixing method of low speed intermittent sticking barrel edge, L-type paddle mixing design makes inks flip and cut, mixing evenly within five minutes without heating up, Speed range 0~ 60rpm, transmission mode is direct transmission to reduce power loss.
Equipped with 0.5/0 7/1.0 mm three thickness die frame, using baseplate fixed structure to ensure film uniformity, metal drawdown blade design to meet long-term use needs.
Max.stirring Capacity 5L, stirring speed 0~ 2000rpm, using strong magnetic drive, suitable for medium capacity stirring, smooth and continuous operation.
The stainless steel frame is suitable for dry, wet, and manual screening, with a aperture of 1000 μm, and laser-engraved labels ensure clear traceability, meeting ISO 3310 standards.
Made of stainless steel, the slurry diaMeter is 50mm, the Rod length is 350mm, the tangential flow is generated during stirring, the turbulence is small, the heat exchange performance is excellent, the performance is mild, and it is suitable for medium and low speed operation.
Rotation speed is constant with brushless DC motor, Max. stirring Capacity 5L, disc heating table is suitable for circular beaker stirring, with anti-corrosion liquid guide Tank to protect internal devices.
Mixing method, L-shaped integral forming Impeller without screw hole easy to clean, Speed range 0~ 60rpm, direct drive to reduce power loss, can set the mixing time and equipped with moving pulley.
