Hydraulic automatic pull-off test, the pull-off speed is stable and controllable, the accuracy is +/- 1% full scale, equipped with pull-off kit size 10-50mm, built-in rechargeable battery and 200,000 Data storage.
With 0.5 accuracy class and 1000N range, support force holding time 0-999.9 seconds can be set, integrated pull-off stop and overload protection functions, easy and reliable operation.
Portable design built-in lithium battery, 0-3000p range accuracy +/- 1%, equipped with 10-50mm pull-off spindle, automatic calculation of pull-off force without conversion table, aluminum alignment unit to ensure uniform testing.
Adopt precision automatic control data collection system, range 3000N, accuracy class 0.5, with force holding and pull off stop function, support 100 groups of test Data storage and qualified judgment statistics.
Adopt double guide Rod structure to ensure Stability, Maximum Measured value 5000N, Travel 220mm, support stepless speed regulation and a variety of test modes, with pull-off stop and force retention functions.
Equipped with a 20mm kit and trimmer, the range covers 0-20MPa, and precise positioning is achieved through a transparent sleeve, specially designed for high viscosity coating adhesion testing.
Adopt low-noise stepless speed regulation motor, with a speed range of 0-500mm/min, with force holding function and four test modes, equipped with limit protection device, support pull-off stop and set force value round-trip motion.
Stepping motor and High Accuracy encoder ensure mechanical stability, displacement accuracy ≤ +/- 0.1mm, speed range 10-800mm/min, support force holding and pull-off stop function, equipped with limit and emergency protection device.
Adopting pneumatic working mode, the test rate can be adjusted from 5 to 60 times per minute, with 4 independent test stations, capable of simultaneously testing switches and plugs and sockets, and supports current on-off and mechanical counting methods.
MCU chip to achieve low power operation, equipped with intelligent Sensor to ensure +/- 3% detection accuracy and 30 seconds fast Response, support a variety of signal output for System integration, with flameproof structure to adapt to hazardous environments.
The fixture can fix the upper and lower ends of the butterfly specimen into a vertical shape, test the vertical compression strength, suitable for a variety of Corrugated Board types, Dimension 150 * 105 * 65mm, weight about 2Kg, easy to operate.
Suitable for a variety of Corrugated Board adhesive strength test, equipped with different specifications of steel needles, needle diaMeter range 1.0-3 mm, support A, B, C, E corrugated test, sample size 25 × 80mm.
Support 100 ° C high temperature treatment, compatible with 96-well 0.2ml standard board design, can be matched with a variety of centrifuge tube modules, to achieve flexible experimental configuration and efficient Sample Handling.
Measurement range 5~ 500μm, error +/- 10%, no power supply, durable, suitable for high temperature and difficult to contact surface measurement.
With 500N range and 0.5 Precision, support force holding and displacement controllable functions, can set the running speed of 10-200mm/min, integrated overload protection and Data storage, to meet a variety of testing needs.
