Hydraulic automatic pull-off test, the pull-off speed is stable and controllable, the accuracy is +/- 1% full scale, equipped with pull-off kit size 10-50mm, built-in rechargeable battery and 200,000 Data storage.
With 0.5 accuracy class and 1000N range, support force holding time 0-999.9 seconds can be set, integrated pull-off stop and overload protection functions, easy and reliable operation.
Portable design built-in lithium battery, 0-3000p range accuracy +/- 1%, equipped with 10-50mm pull-off spindle, automatic calculation of pull-off force without conversion table, aluminum alignment unit to ensure uniform testing.
Adopt precision automatic control data collection system, range 3000N, accuracy class 0.5, with force holding and pull off stop function, support 100 groups of test Data storage and qualified judgment statistics.
Adopt double guide Rod structure to ensure Stability, Maximum Measured value 5000N, Travel 220mm, support stepless speed regulation and a variety of test modes, with pull-off stop and force retention functions.
Equipped with a 20mm kit and trimmer, the range covers 0-20MPa, and precise positioning is achieved through a transparent sleeve, specially designed for high viscosity coating adhesion testing.
Adopt low-noise stepless speed regulation motor, with a speed range of 0-500mm/min, with force holding function and four test modes, equipped with limit protection device, support pull-off stop and set force value round-trip motion.
Stepping motor and High Accuracy encoder ensure mechanical stability, displacement accuracy ≤ +/- 0.1mm, speed range 10-800mm/min, support force holding and pull-off stop function, equipped with limit and emergency protection device.
High Accuracy S type sensor accuracy of 0.5%, range 0-10KN, with pull-off automatic stop function, three operation modes optional, can directly enter the test block area display force value and strength value
150W Philips infrared lamp, peak wavelength 950nm, temperature measurement accuracy +/- 0.5 ° C, insulation accuracy +/- 2%, can quickly compare the insulation performance of different materials, the test time is only 1 minute.
Temperature range 37~ 65 ℃, Temperature Fluctuation +/- 0.5 ℃, using stainless steel liner and microcomputer intelligent temperature control instrument, with timing function and over-temperature water cut-off alarm, can be external circulation pump output thermostatic water flow.
The use of high temperature resistant fiberglass insulation material wOven into a hemispherical internal heating heater, the highest temperature of 380 ℃, heating area and rapid heating, excellent insulation effect, to avoid the risk of open flames.
Adopting pneumatic working mode, the test rate can be adjusted from 5 to 60 times per minute, with 4 independent test stations, capable of simultaneously testing switches and plugs and sockets, and supports current on-off and mechanical counting methods.
The use of high temperature resistant fiberglass insulation material wOven into a hemispherical internal heating heater, heating area and heating fast, the highest temperature of 380 ℃, good insulation effect and no open flame, to avoid bruising Glass ware.
The use of high temperature resistant fiberglass insulation material wOven into a hemispherical internal thermal structure, the heating area is large and the temperature rises rapidly, and the thermal insulation effect is excellent; no open flame design avoids bruising Glass ware, the maximum operating temperature is 380 ° C, and the power is 1500W to support continuous work.
