Direct Current Electric Stirrer

A DC stirrer drives the stirring paddle to rotate via a DC motor, creating forced convection in the liquid. It is used in laboratories for mixing solutions, promoting reactions, or preventing sedimentation, and is suitable for sample preparation processes in industries such as coatings and inks.
Selection
When selecting, consider matching the sample viscosity with the speed range, determine the stirrer size based on the container dimensions, choose stainless steel or polytetrafluoroethylene (PTFE) materials for corrosive media, and pay attention to motor heat dissipation and noise control for long-term operation.

Terms

Standards

Instruments

Stepper motor direct drive to ensure accurate Rotation speed, Measurement accuracy +/- 1% F. S, repRoducibility +/- 0.5% F. S, can display the maximum viscosity value of the rotor at the current Rotation speed, beyond the range of alarm.

$ 3661.00

Rotation speed 3000rpm, maximum linear speed 33m/s, high dispersion efficiency, strong material shear force, the formation of uniform suspension effect, safe and convenient operation, electric lifting fast fixed sealing barrel.

$ 2676.00

With electric and magnetic dual stirring function, Temperature range to 100 ℃, Max. stirring Capacity 1000mL, suitable for small volume sample precise and stable stirring.

$ 180.00

Electric lifting design is light and convenient, the highest Rotation speed 3000rpm, linear speed of 33m/s, double-end sealing structure to ensure vacuum sealing defoaming, suitable for viscosity ≤ 25000cps materials.

$ 2883.00

Using brushless DC motor to provide 500W output power and 100-1500rpm Speed range, equipped with electric lifting system up to Travel 500mm, with LCD real-time display and 0-9999 minutes timing function, support large capacity low medium and high viscosity material mixing.

$ 3849.00

Rotation speed up to 3000rpm, line speed up to 33m/s, electric lifting design for easy operation, double-end sealing structure to ensure vacuum sealing defoaming effect, suitable for viscosity ≤ 25000cps material.

$ 3089.00

Rotation speed up to 3000rpm, maximum linear speed 33m/s, Processing capacity 10-40L, using electric lifting and double-end sealing structure, high dispersion efficiency, vacuum sealing defoaming effect is good, safe and convenient operation.

$ 3151.00

Rotation speed up to 3000rpm, line speed up to 33m/s, Processing capacity 10-40L, using electric lifting and double-end sealing structure, uniform dispersion and vacuum sealing defoaming effect is good.

$ 3089.00

Stepper motor direct drive gearless, accurate speed; LCD liquid crystal with blue backlight, display information; can display the maximum viscosity of the rotor at the current speed; measurement timing function; viscosity value continuous change; beyond the measurement range alarm prompt; Standard RTD temperature Probe; Computer full scale linear correction; AC Power Adapter 100V-240V, good anti-interference.

$ 1892.00

Electric Pump with double oil path plunger, high voltage 63MPa, Measurement accuracy +/- 1.5%, Peak hold and Data storage function, Hollow structure is convenient for anchor cable detection and operation.

$ 2234.00

Vacuum sealing defoaming effect, Rotation speed up to 3000rpm, linear speed up to 33m/s, electric lifting operation is convenient, high dispersion efficiency, suitable for viscosity ≤ 25000cps materials.

$ 2986.00

Electric lifting design is light and convenient, the highest Rotation speed of 3000rpm, line speed of 33m/s, double-end sealing structure to ensure the vacuum sealing defoaming effect, suitable for viscosity ≤ 25000cps material.

$ 2779.00

Rotation speed up to 3000rpm, linear speed up to 33m/s, electric lifting design, double-end sealing structure, suitable for viscosity ≤ 25000cps materials, uniform dispersion and good defoaming effect.

$ 2986.00

Rotation speed up to 3000rpm, maximum line speed 33m/s, electric lifting design easy to operate, double-end sealing structure to ensure the vacuum sealing defoaming effect, suitable for viscosity ≤ 25000cps material.

$ 2571.00

Electric lifting design is lightweight and convenient, the highest Rotation speed is 3000rpm, the linear speed can reach 33m/s, the double-end sealing structure ensures the vacuum sealing defoaming effect, and is suitable for materials with viscosity ≤ 25000cps.

$ 3296.00

Articles

Resistance Tester Selection: Measurement Methods for Low Resistance and High Resistance
This article introduces the selection method of resistance testers. Based on the range of the measured resistance, low resistance requires the four-wire Kelvin method, using constant current and voltage measurement to eliminate the influence of contact resistance; high resistance uses the voltage method to measure tiny currents, with attention to shielding and leakage prevention.
Application of Perovskite Coater in the Preparation of Intermediate Layers in Tandem Solar Cells
This article introduces the application of perovskite coating machines in the preparation of the intermediate layer of tandem solar cells.
Application of Spray Coating Machines in the Encapsulation of Flexible Electronic Devices
This paper introduces the application of spray coating machines in the encapsulation of flexible electronic devices.
Roll-to-Roll Preparation of Perovskite Coaters for Flexible Perovskite Solar Cells
This article introduces the roll-to-roll fabrication method of flexible perovskite solar cells.
Application of Karl Fischer Micro Moisture Meter in Moisture Control of Lithium Battery Electrolyte
The Karl Fischer micro-moisture analyzer is based on the Karl Fischer titration principle, which measures trace moisture in lithium battery electrolytes through the quantitative reaction between iodine and water.
Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
Temperature Oscillation Suppression in Reflux Synthesis Using Laboratory Stirring Heating Mantles
This article explores the causes and suppression methods of temperature oscillations in laboratory heating mantles during reflux synthesis.
Improving Efficiency with Vortex Mixers in Biological Sample Pre-treatment
This article primarily discusses how vortex mixers enhance the efficiency of biological sample pretreatment. By generating a vortex motion through an electric motor, they enable rapid and uniform mixing of liquids, saving time and delivering better results compared to traditional manual methods.
A Comprehensive Guide to Selecting an Electronic Balance
This article introduces the key points for selecting an electronic balance. It provides a detailed list of core parameters such as accuracy class, repeatability, and linearity error, and explains their impact.
The Zahn cup is used for the daily inspection of the viscosity of electrophoretic paint bath solutions.
This article introduces the application of the Zahn cup in daily inspections of the viscosity of electrophoretic paint bath solutions. The viscosity of electrophoretic paint affects coating quality, making daily inspections crucial. The Zahn cup is simple to operate, cost-effective, and suitable for rapid on-site measurements.
High-temperature aging test chamber accelerates life testing of electronic components.
The high-temperature aging test chamber accelerates the physical and chemical changes within electronic components by simulating high-temperature environments, thereby predicting their long-term performance and failure modes.
Application of Automatic Coating Machines in the Preparation of Ceramic Coatings for Lithium-Ion Battery Separators
This article discusses the application of automatic film coating machines in the preparation of ceramic coatings for lithium battery separators. Traditional manual coating methods often result in uneven coatings, which can adversely affect battery performance.
Automatic coating machines are used for the uniform application of conductive silver paste onto ITO glass.
This article explores the technique of uniformly coating conductive silver paste on ITO glass using an automatic coating machine. By controlling parameters such as coating speed and pressure, the automatic coating machine replaces traditional manual methods, thereby enhancing the consistency and repeatability of the coating process.
Study on the Dispersion Uniformity of Blade Coating Machines in High-Load Electrode Slurry Coating
This article investigates how to optimize the dispersion uniformity of coatings by adjusting process parameters when using a blade coater to handle high-load electrode slurries.
The wire bar coater with heating and vacuum adsorption is used for the preparation of perovskite solar cell layers.
This article introduces a new technique for preparing the light-absorbing layer of perovskite solar cells: a wire-bar coater with heating and vacuum adsorption capabilities.