The scraping speed is adjustable from 10-100mm/s, and the drawdown blade load 1.75-6 kg is adjustable. It is used with High Accuracy GrindoMeter to avoid personnel operation errors and improve test conformity.
Adopt scraping and dipping process, effective application width 300mm, Temperature control accuracy +/- 3 ℃, mechanical speed 0.1-1 m/min adjustable, equipped with magnetic particle brake and tension controller to achieve automatic tension control, suitable for a variety of Coatings.
The equipment adopts scraping method, coating speed 1~ 10m/min, thickness range 0.005-3mm, equipped with automatic deviation correction and tension control to ensure uniform and stable Spreader.
Adopt scraping method, coating speed 1-10m/min adjustable, Spreader thickness range 0.005-3mm, drying tunnel temperature up to 200 ℃, equipped with adjustable drawdown blade device and thickness adjustment dial Meter to achieve precise control.
Adopt scraping method, coating speed 1-10m/min adjustable, Spreader thickness range 0.005-3mm, equipped with drying tunnel temperature RT + -200 ℃ and automatic deviation correction device to ensure uniform and stable Spreader.
Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
The diaMeter of the scraping needle is 0.45mm, the scraping speed is adjustable from 10 to 60 times/minute, and it has an automatic shutdown function to ensure accurate and efficient testing. It is suitable for the durability evaluation of insulating materials.
With a 45 ° test angle and an adjustable speed of 5mm/sec, equipped with a 500g weight and a standard pencil set, stable and low-noise electric control is achieved through a stepper motor.
Rotation speed of 10000rpm is achieved by using 750W three-phase asynchronous motor, and the electric lifting platform supports 300mm Travel, which can handle 10L materials and work continuously for a long time.
Glass material is conducive to film flatness, size 230 * 340mm, with wire Rod or Film Applicator for scraping operation is more effective.
Formed pRoduction process to ensure uniform film, wet film thickness 82.3 μ m precise control, stainless steel wear-resistant and durable, application width 300mm to meet a variety of experimental needs.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Using 160 * 280mm size, with wire Rod scraping ink to ensure that the film is flat, Glass table is conducive to operation and observation effect.
Mirror stainless steel liner and electric heating film heating, Temperature Uniformity +/- 1 ℃, heating speed, double-decked door design to reduce heat loss, four corners arc easy to clean.
Using 4000W three-phase asynchronous motor, Speed range 0-2800rpm, equipped with a variety of stator heads to adapt to different material viscosity, electric lift Travel up to 700mm, support long-term operation with low temperature rise.
