The cone shaft length is 203mm and the large end diaMeter is 38mm, which can test the cone bending resistance of a single layer or the entire coating system separately. Operating temperature is 23 +/- 2 ℃ and relative humidity is 50 +/- 5%.
Range 5-50p, accuracy of +/- 2%, equipped with 5 kinds of special calibrated oil to ensure measurement accuracy, as the core component of cone-plate viscoMeter to ensure test Stability.
The integrated adsorption structure is used with a silent oil-free air Compressor, which can reduce the dewpoint temperature by 20~ 40 ° C, has the function of drying and sterilization, and the water outlet effect is stable and reliable.
Measurement accuracy +/- 2%, equipped with 5 calibrated oils to ensure measurement accuracy, as a special accessory for cone-plate viscoMeter to achieve stability testing.
Measurement accuracy of +/- 2% with a cone rotor range of 0-10p, requires only 30 μl of sample volume, and provides 5 calibrated oils to ensure measurement accuracy.
Pure oil-free design ensures clean gas, exhaust volume of 1500L/min, automatic start and stop to reduce energy consumption, pressure dew point 2-10 ℃, suitable for a variety of industry needs.
Adopt pure oil-free design to ensure clean gas, dew point range -40~ -60 ℃, exhaust volume 600L/min, automatic start and stop to reduce energy consumption, no need for special personnel on duty and easy maintenance.
Measurement accuracy of +/- 2% with a range of 10-100p, 5 calibrated oils for measurement accuracy, High Accuracy rotor designed for cone-plate viscoMeters.
Viscosity measurement range 0-5p, accuracy +/- 2%, equipped with 5 special calibrated oils to ensure measurement accuracy, High Accuracy rotor designed for cone-plate viscoMeters.
Double disc independent control can be operated by double person at the same time, the diaMeter of the throwing disc is 230mm, the Rotation speed is 900rpm, the transmission is stable and the noise is small, and the operation and maintenance are convenient.
Manually pressing the sealing cone and adjusting the rising speed with the heavy hammer, the spring pre-tightening mechanism enhances the sealing performance, the Measurement range is 1~ 100 ° SR, and the discharge time of the overflow port is 149 +/- 1 second.
Adopt double guide Rod structure to ensure Stability, range 10KN accuracy 0.5, support force holding and pull-off stop function, with four test modes and adjustable speed range 0-500mm/min.
Using CR12 molybdenum vanadium material double edge structure, film thickness 500μm/600μm, U-shaped design to achieve fast Spreader, effective application width 80mm, total length 100mm, suitable for wet-film preparatory.
Double-decked structure design with a capacity of 5 liters, suitable for use with a variety of Power Dispersers to improve material handling efficiency.
Double pulse Back flushing automatic powder cleaning, Laminating filter accuracy of 0.3 microns, powder gas separation efficiency, stainless steel material is durable, color change operation is simple, improve dust recovery efficiency.
