The uniformity of the transmission surface exceeds 90%, the standard four-speed Color temperature is adjustable, the illuminance adjustment range is 0-120000Lux, and the thickness dimming knob is equipped to achieve precise control. Illuminant has no stroboscopic and the lifespan is more than 10,000 hours.
Equipped with 7 kinds of Impact devices and automatic identification, support 6 kinds of Hardness standard conversion and tensile strength conversion, embedded thermal printer timely output report, Bluetooth transmission data, can store 100 sets of test data.
Coaxial focusing mechanism with coarse fretting, fretting grid value of 2 μ m, equipped with two sets of illumination systems of drop transmission and transmission, can observe opaque and transparent samples respectively, and the three-eyepiece tube can switch the polarization observation.
Using dual array 256 pixel CMOS Detector, measurement Wavelength range 360~ 780nm, support reflection and transmission measurement, four caliber automatic switching, built-in temperature monitoring and compensation, to ensure accurate and stable Color data.
With 5000V output voltage and 1000GΩ Measurement range, it supports polarization index testing and USB data transmission, and the backlit display is easy to read measurement results in dark environments.
Measurement principle of diffuse transmission, optical density Measurement range of 6.000 OD, accuracy +/- 0.02 OD, equipped with fixed seat and bracket, support two Measurement mode, suitable for translucent material testing.
Using ARM processor and real-time Operating system, Measurement range +/- 80μm, can measure 13 asperity paraMeters, support a variety of Sensors and wireless data transmission, built-in storage can save 200 sets of data.
Mechatronics design, Bluetooth wireless transmission function, mass storage of 100 sets of data, Measurement range Z axis 160μm, support Ra, Rz and other more than 20 kinds of paraMeter measurement, adapt to -20 ℃~ 40 ℃ working environment.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
Support Bluetooth wireless transmission, can access data through mobile devices within 30 Meters. Built-in self-calibrated CO2 Sensor, Measurement range 0-5000ppm, high accuracy and low maintenance cost. At 5 minutes Sampling rate, the battery can support operation for up to half a year.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
The series micro motor provides 85W input Power, Max. Torque reaches 94N.cm, supports 100-1300rpm stepless speed regulation; multi-stage Non-metallic gear transmission enhances torque, stable operation and low noise, and is suitable for a variety of Impellers to meet different viscosity requirements.
Using three-phase brushless DC motor to achieve 50-1500rpm stable speed regulation, temperature control accuracy +/- 1 ℃ and with temperature protection function, soft start design to prevent stirrer beating, suitable for long-term unmanned operation.
The series micro motor provides 85W input Power, Max. Torque reaches 94N.cm, and supports stepless speed regulation of 100-1300rpm. Equipped with special rolling head for easy loading and unloading, multi-stage Non-metallic gear transmission realizes stable force increase, and open frame is suitable for a variety of containers.
Provide single polarized, orthogonal polarized and conical observation, total magnification 40X~ 1000X, coarse micro coaxial focusing system, fine-tuning accuracy of 0.01mm, built-in dimming high luminance LED lamp.
