Sampling speed up to 1920HZ, accuracy level 0.5, support three units of automatic conversion and a variety of test mode, with data storage and qualified judgment function, suitable for high-speed Impact torque detection.
Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
High torque design, Speed range 10~ 500rpm, low noise operation, suitable for high viscosity material mixing, Electric lift Travel 245mm, Stainless steel Impeller to ensure efficient mixing.
Using brushless DC motor to provide 500W output power and 100-1500rpm Speed range, equipped with electric lifting system up to Travel 500mm, with LCD real-time display and 0-9999 minutes timing function, support large capacity low medium and high viscosity material mixing.
Accuracy of +/- 0.5%, sampling speed of 100 times/second, can store 99 sets of data and automatically calculate statistical values, support three unit automatic conversion and peak hold functions.
Driven by serial micro motor, Max. Torque reaches 159.2N.cm, Speed range 0~ 1800rpm stepless speed regulation, suitable for 0~ 50000mPa · s viscosity liquid, compact structure and stable operation.
Using electronic Sensor technology, sampling speed 100HZ, accuracy up to 1 level, support three units automatic conversion and three test modes, with data storage and upper and lower limit alarm functions.
With a 45 ° test angle and an adjustable speed of 5mm/sec, equipped with a 500g weight and a standard pencil set, stable and low-noise electric control is achieved through a stepper motor.
Sampling speed of 100Hz, accuracy of 0.5, support three units of automatic conversion and a variety of test mode, can store 99 sets of data and automatically calculate statistical values, equipped with PC software for data analytics.
Driven by serial micro motor, the output torque reaches 95.5N.cm, with stepless speed regulation and automatic overload protection to ensure constant speed operation and experimental safety.
With 0.001N.m torque resolution and ≤ +/- 0.5% force value error, support preset force value and angle mode, real-time display of stiffness and automatic calculation of statistical pass rate, suitable for a variety of torsion test requirements.
Adopt 0.5% F.S. High Accuracy torque Sensor, support bi-directional torque test and 400 sets of Data storage, with locking force and opening force dual Measurement mode and peak hold function, to meet the needs of a variety of Encasement container testing.
Rotation speed of 10000rpm is achieved by using 750W three-phase asynchronous motor, and the electric lifting platform supports 300mm Travel, which can handle 10L materials and work continuously for a long time.
The 7-inch Touchscreen is easy to operate, with a torque resolution of 0.001N.m, supports six unit swaps, can set 5 test points and display stiffness in real time, and has a maximum peak test mode to record the fracture value of the sliding tooth.
Mirror stainless steel liner and electric heating film heating, Temperature Uniformity +/- 1 ℃, heating speed, double-decked door design to reduce heat loss, four corners arc easy to clean.
