Adopt three-axis linkage system, spindle Rotation speed 24000rpm, accuracy resolution 0.003mm, support a variety of spline and notch processing, with material Water-Cooled and processing compensation functions, one processing can complete a variety of splines.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
DC brushless motor design, Rotation speed 0~ 2000rpm, put in the stirrer without hopper; double-decked thermal insulation structure, rapid heating and prolong the life of the host; built-in over-temperature protection device, safe and reliable use.
Using three-phase brushless DC motor to achieve 50-1500rpm stable speed regulation, temperature control accuracy +/- 1 ℃ and with temperature protection function, soft start design to prevent stirrer beating, suitable for long-term unmanned operation.
Speed range is 300-23000 rpm, and the internal suction homogeneous structure can effectively homogenize, emulsify and extract. Stirrer can be used at low speed.
Equipped with thirteen kinds of specifications center plate to adapt to 0.1~ 1.0mm thickness samples, using special alloy material anode platings, CNC numerical control fine grinding chamfering treatment to ensure leveling accuracy, clamping thickness deviation ≤ 0.01mm.
Equipped with a 200mm diaMeter pick-up cylinder and an 8-liter capacity, the manual Stirrer works in tandem with an 80-mesh forming filter for uniform Pulp distribution and efficient dehydrating.
Using electronic constant force speed control circuit, digital direct display Rotation speed, Power 500W, Speed range 100-2000rpm, low reliable operation noise, can calculate the relationship between stirring line speed and chemical reaction rate.
Rotation speed up to 3000rpm, fineness of grinding up to 10 microns or less, equipped with double-decked chill down jacket temperature rise of less than 10 degrees, zirconia bead grinding medium and CNC separation plate design, easy to operate and clean.
Adopt sealing solvent system to reduce water vapor interference, support 100 titration methods, Measurement range covers 1ppm to 5%, built-in automatic drift correction function, equipped with electronic adjustment Magnetic Stirrer.
Four-station independent operation does not interfere with each other, the brushless DC motor provides 12.5mN · M torque, temperature control accuracy of +/- 1 ℃, supports automatic temperature control function and stepless speed regulation of 0~ 1500rpm, to meet the needs of multi-sample synchronous processing.
Maximum stirring capacity 3 liters, stirring speed 200~ 1800rpm stepless speed regulation, Heating power 450W, Temperature range RT + 5~ 320 ℃, using aluminum alloy die-casting shell, high temperature corrosion resistance easy to clean.
With a maximum stirring capacity of 1000ml and 300W Heating power, stepless speed regulation can precisely and stably stir liquids within the range of 2400rpm, especially suitable for small volume sample testing, easy to operate.
Rotation speed up to 3000rpm, fineness of grinding up to 10 microns or less, double-decked chilled down jacket design temperature rise less than 10 ℃, equipped with zirconia bead grinding medium to achieve efficient wet grinding, separation plate using whole CNC processing life is long.
High torque design, Speed range 10~ 500rpm, low noise operation, suitable for high viscosity material mixing, Electric lift Travel 245mm, Stainless steel Impeller to ensure efficient mixing.
