Equipped with a heated vacuum bed, the temperature can reach 100 ° C, the coating speed range is 0.1~ 500mm/s, Travel 415mm, supports a variety of film tools, and the intelligent interface simplifies the operation.
Equipped with perforated heated vacuum bed, the temperature can be increased to 100 ° C, the coating speed range is 0.1-500 mm/s, and the bar and Blade Coating methods are supported to ensure uniform film thickness and sample repeatability.
The application width can be adjusted freely, and the drawdown blade Coater can be adapted to meet different experimental testing needs and realize flexible film operation.
The application width is adjustable from 100-400mm, the thickness range is 0.005-3mm, the rubber roller is heated to 200 ° C, and the drying temperature reaches 200 ° C to realize the continuous roll-to-roll film.
Spreader accuracy up to +/- 0.003mm, Spreader Film thickness 0.2-10 mm, rate 2-180mm/s stepless adjustable, heating temperature to 150 ℃, support a variety of accessories customization to ensure uniform and stable Spreader.
Support bar and Drawdown blade two coating methods, suitable for high, medium and low viscosity materials. Heating temperature up to 180 ° C, Vacuum chuck area, high film accuracy, adjustable speed, easy to operate and clean.
Coating speed 5~ 200mm/s adjustable, Spreader thickness range 0.001~ 10mm, using Vacuum chuck and automatic feeding system to ensure high film repRoducibility, easy operation.
Adopting chip tray direct temperature control technology, the heat exchange speed is 1-3 seconds, the speed range is 100-3000 rpm, the acceleration is 100-3000 rpm, and it has 5-stage speed adjustment and 12 sets of parameter memory functions, suitable for a variety of process requirements.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Spreader accuracy of +/- 0.003mm, coating speed 5~ 200mm/s adjustable, effectively improve film repRoducibility and conformity.
Coating speed 1~ 10m/min adjustable, wet film thickness range of 0.005-3mm, drying temperature up to 200 ℃, using continuous experimental film design, equipped with adjustable Blade Coating device and automatic deviation correction function.
Spreader accuracy +/- 0.003mm, Spreader thickness range 0.001~ 10mm adjustable, with Vacuum chuck and heating function, support bar and drawdown blade two coating methods to ensure Spreader uniformity and repRoducibility.
Blade Coating method, coating speed 1~ 300mm/s stepless speed regulation, film thickness control accuracy +/- 0.003mm, with heating and Vacuum chuck function, clamshell drawdown blade design for easy cleaning, suitable for High Accuracy automatic film.
Application width 500mm, wet film thickness 0.005-3mm adjustable, using servo drive and PLC control, with automatic tension and correction function, suitable for a variety of coils and Coating types.
Adopt bar coating method, coating speed 1~ 300mm/s stepless speed regulation, film accuracy +/- 0.001mm, equipped with High Accuracy imported bar and Glass table, support application length and speed free adjustment, suitable for a variety of substrate film.
