Oil-free Silent Dry Air Compressor

The oil-free silent dry air compressor compresses air via pistons or screws, with built-in desiccants to adsorb moisture and a soundproof cover to reduce noise. It provides clean, dry air for laboratory instruments, spraying equipment, and precision manufacturing, preventing contamination from oil and adverse effects from humidity.
Selection
Select the exhaust volume based on gas consumption and match the working pressure according to pressure requirements. Pay attention to the noise level in decibels to suit the environment, and check the air dew point after drying. Consider heat dissipation design and maintenance convenience, and confirm that the power specifications match the usage scenario.

Terms

Standards

Instruments

Noise is as low as 54 decibels at work, displacement is 155 liters per minute, pure oil-free piston system ensures clean gas, Nano coating cylinder liner enhances durability, automatic start-stop saves energy and saves electricity.

$ 832.00

The exhaust capacity is 462L/min, the noise is as low as 53dB, the pure oil-free design ensures that the gas is clean, and the automated operation does not require special personnel to be on duty, which can be adapted to a variety of industry needs.

$ 1832.00

Noise as low as 52 dB, pure oil-free design ensures zero gas pollution, equipped with 60L buffer Tank and electronic start-stop controller, providing stable air pressure output, suitable for a variety of industrial environments.

$ 961.00

The pure oil-free design ensures that the gas is clean, the noise is as low as 52 decibels, the exhaust volume is 152L/min to meet the demand for high-efficiency gas supply, and the automatic start and stop saves energy and worry, and the safety protection is perfect.

$ 577.00

The pure oil-free design ensures that the gas is clean, the noise is only 53 decibels, the exhaust volume is 230L/min, the automatic start-stop energy saving and worry-free, and the anti-rust and anti-bacterial treatment of the gas storage Tank ensures safety.

$ 1013.00

The pure oil-free design ensures that the gas is clean, the exhaust volume reaches 348L/min to meet the demand for efficient gas supply, the noise is as low as 53dB, the operation is quiet, the automated operation does not require special personnel to be on duty, and the energy consumption is optimized for rapid gas pRoduction.

$ 1484.00

The pure oil-free design ensures that the gas is clean, the noise is as low as 53 decibels, the exhaust volume is 308L/min to meet the needs of various applications, and the automatic start and stop saves energy and worry, and the safety protection is perfect.

$ 1032.00

Adopting a pure oil-free lubrication piston system, the noise value is only 59dB, and it is equipped with a 60L anti-rust treatment gas storage Tank. The air pressure can be adjusted within the range of 5-8Bar, and it has multiple automatic protection functions.

$ 1042.00

Noise at work is only 53dB, pure oil-free lubrication piston system to ensure clean gas, Power 1800W, exhaust 354L/min, automatic start-stop design energy saving and worry-free, cylinder liner using Nano coating technology to extend life.

$ 1348.00

The pure oil-free design ensures that the gas is clean, the exhaust capacity is 608L/min to meet the high efficiency requirements, the noise is as low as 53dB, the operation is quiet, and the automated operation does not require special personnel to be on duty. Regular drainage can be maintained.

$ 2099.00

Adopt piston structure, running Power 550W, noise value 58dB, with pure oil-free design, output gas clean, air pressure adjustable range 5-8Bar, automatic start-stop protection, service life of more than 15,000 hours.

$ 606.00

The exhaust volume reaches 758L/min, the noise is only 55dB, the pure oil-free design and automatic start-stop function are adopted, and the matching dryer can realize -20 to -60 dew points, which is easy to operate and easy to maintain.

$ 2345.00

The noise during operation is only 52dB, using a pure oil-free lubrication piston system, with clean exhaust; Power 1200W, exhaust capacity 236L/min, equipped with an automatic protection system, no need for special personnel on duty, and a lifespan of more than 20,000 hours.

$ 945.00

The noise at work is only 53dB, using oil-free lubrication piston system and Nano coating cylinder liner, the exhaust is clean, the service life is up to 20,000 hours, and it has multiple automatic protection functions, which is easy to operate automatically.

$ 1945.00

The working noise is as low as 52dB, the maximum pressure is 8bar, the exhaust volume is 310L/min, the oil-free lubrication piston system and Nano coating cylinder liner are used, the gas is clean and the life is long, and it has multiple automatic protection functions.

$ 1074.00

Articles

The use of gravure proofing machines in the comprehensive evaluation of gravure ink printability and drying performance.
This article explores how a gravure proofing press can be used to comprehensively evaluate the printability and drying properties of gravure inks. The experiment tested the dot sharpness, transfer rate, and leveling properties of different inks using standard equipment, while recording drying times through the filter paper method and infrared temperature measurement.
The friction color fastness tester measures the amount of color transfer under dry and wet abrasion conditions for ink.
This article introduces a method for testing the amount of ink color transfer using a friction colorfastness tester, simulating both dry and wet rubbing conditions. Dry rubbing involves rubbing the ink surface with a dry white cotton cloth, while wet rubbing uses a white cotton cloth moistened with water.
Laboratory Drying Oven Model Selection - Difference Between Forced Air Convection and Non-Forced Air Convection
This article on the selection of laboratory drying ovens primarily introduces the differences between forced convection (air-blowing) and natural convection (non-air-blowing) drying ovens.
Surface Absorbency Tester for Predicting Drying Speed of Printing Ink on Coated Paper
This article explores how the surface absorbency tester predicts the drying speed of ink on coated paper. Traditional methods rely on actual printing tests, which are time-consuming and difficult to quantify.
Safety Considerations for Selecting Explosion-Proof vs. Ordinary Drying Ovens in Paint Laboratories
When selecting a drying oven in a paint laboratory, the type should be determined based on the safety risks of the samples and the environment.
Key Parameters for Air Compressor Selection and Analysis of Energy Efficiency Standards
The selection of an air compressor requires comprehensive consideration of discharge pressure, discharge volume, drive power, and the characteristics of the compressed medium to meet actual air usage requirements.
The coating machine applies the adhesive layer of the plaster patch onto the backing layer.
The coating machine applies adhesive evenly onto the backing material through steps such as feeding, coating, drying, and winding, forming a stable adhesive layer.
The oral dissolving film is uniformly coated by a film applicator and then dried and formed.
Oral dissolving films are prepared by a coating mechanism, where a liquid containing film-forming materials is uniformly applied onto a substrate, followed by drying to remove the solvent and form a solid film.
Determination of dry matter content in pulp using an electric thermostatic drying oven.
This article introduces the method for determining the dry matter content of pulp using an electric thermostatic drying oven. Dry matter content is a key indicator for evaluating pulp quality. The principle of determination involves evaporating the moisture in the pulp through heating and calculating the content based on the mass difference before and after drying.
Zero-span tensile strength tester measures the tensile strength of wet pulp.
This article introduces the method of measuring the tensile strength of wet pulp using a zero-span tensile strength tester. Traditional testing is often conducted after the pulp is dried, but testing in the wet state can more directly reflect the bonding potential between fibers.
Application of Roll-to-Roll Coating Machines in the Energy Storage Field
A roll-to-roll coating machine is a continuous coating equipment. Its core process involves uniformly applying slurry onto the surface of a flexible substrate (such as metal foil or polymer film), followed by steps like drying and rolling to produce continuous coated materials.
Drying Time Determination: Simultaneous Verification of Surface Drying Test Method, Through-Drying Test Method, and Instrumental Test Method
This article discusses three methods for determining the drying time of materials such as coatings. Traditional methods are divided into surface drying and through drying measurements, which are simple to operate but rely on subjective judgment. Instrumental methods provide objective data by monitoring physical changes such as mass and resistance, offering higher precision but at a higher cost.
Preparation of Paint Film Test Panels
The standardized preparation of paint film test panels is fundamental for accurately assessing the performance of paint films. The entire process includes key steps such as substrate selection and pretreatment, paint preparation, coating, drying and curing, thickness measurement, and curing.
From aluminum foil and copper foil to electrode coating, the laboratory coating machine handles it all in one go.
A laboratory coating machine is a sample preparation device used for material research and development and quality control. It evenly applies slurry onto substrates such as aluminum foil and copper foil, forming a film of specific thickness by controlling the drying process.
The coating machine in the laboratory ensures a more stable functional layer on the surface of copper and aluminum foils.
The laboratory coating machine is used to apply functional layers on the surfaces of copper foil and aluminum foil. By precisely controlling parameters such as coating speed, slurry viscosity, and drying temperature, it enhances the uniformity and adhesion of the coatings.