Mixing method of low speed intermittent sticking barrel edge, professional Impeller design, can be thoroughly stirred in 10 minutes without heating up, Speed range 0~ 50rpm adjustable, easy to replace stainless steel Mixing Tank.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Driven by brushless DC motor, Speed range 60~ 1500rpm, Acceleration 1~ 250rpm/s. Supports forward and reverse alternating and intermittent stirring, programmed control ensures mixing uniformity and Repeatability.
Driven by brushless DC motor, Speed range 60-1500rpm, Acceleration 1-250rpm/s. Supports forward and reverse cycle and intermittent mode, program paraMeters can be stored for a long time, Operating interface is intuitive.
With 3000 times/min and 6000 times/min two vibration frequencies, the amplitude can be continuously adjusted between 0mm and 3mm, supporting three modes of subtle vibration, intermittent vibration and continuous vibration, suitable for ≤ 325 mesh material analysis.
Gluing time up to 3000 seconds, speed range of 100 to 10000rpm, acceleration of 100-10000rpm/s, support Vacuum chuck and solenoid valve control gas path, suitable for assembly line process.
The homogenizing time is up to 3000 seconds, the speed range is 100-10000rpm, and the acceleration is 100-10000rpm/s. It supports multi-stage program control. Vacuum chuck ensures the stability of the substrate and is suitable for assembly line processes.
The uniform glue speed is adjustable from 100 to 7000rpm, and the time is adjusted steplessly in multiple stages. The solenoid valve control gas path is suitable for the assembly line process. The motor torque is large and the operation is smooth. Vacuum chuck ensures the stability of the substrate.
High homogenizing efficiency, support 1-5 stage program control, 3000 seconds per period, speed range 100-10000rpm, acceleration 100-10000rpm/s, solenoid valve control gas path suitable for assembly line process.
The application width can be adjusted freely, and the drawdown blade Coater can be adapted to meet different experimental testing needs and realize flexible film operation.
Miniaturized design equipped with precision motor, the highest Rotation speed of 10000rpm, Acceleration range of 100-5000rpm/s, support 5 Linear dispersion storage function, transparent cavity easy to observe the coating process.
The uniform glue time is up to 3000 seconds, the speed range is 100-10000rpm, and the acceleration is 100-10000rpm/s. The solenoid valve is used to control the air path, which is suitable for assembly line processes. The motor torque is large and the operation is smooth.
The uniform glue time can be adjusted from 0 to 240 seconds, the speed range is 100-7000rpm, the four-stage speed controller ensures the uniformity of the coating, the solenoid valve control gas path is suitable for the assembly line process, and the motor torque is large and the operation is smooth.
Spreader speed 0-5m/min, effective application width 300mm, support UV curing and cutting function, Servo Control system to ensure High Accuracy operation.
