50L large capacity swirl/spin bottle with 1.75m ² condensation area, evaporation capacity of 9L/h; PTFE sealing ring and Teflon coating liner, corrosion resistance and long life; electric lifting structure and anti-dry burning protection to ensure safe and stable operation.
Automatic lifting structure simplifies operation, double-decked serpentine condenser tube chills down an area of 0.15 square Meters, evaporation capacity of 22ml/min, sealing system adopts high resilience PTFE material, high temperature corrosion resistance, prolong service life.
Equipped with 20L large capacity swirl/spin bottle and 1.29M ² condensing area, evaporation capacity of 4L/h; using electric lifting and PTFE corrosion sealing ring, support water Bath oil Bath double heating mode to ensure smooth and safe operation.
5L large capacity swirl/spin bottle with double-decked condenser, evaporation capacity of 2L/h, with electric lift and PTFE sealing system, support water Bath oil Bath heating and temperature accuracy +/- 1 ℃.
10L large capacity swirl/spin bottle with 0.49M2 condensing area to improve evaporation efficiency, electric lift and PTFE sealing system to ensure smooth operation and corrosion resistance, support water Bath oil Bath double heating mode.
Double-decked serpentine coil design, chilled down area of 0.15 m2, maximum evaporation capacity of 22ml/min, support water Bath and oil Bath double heating mode, sealing system using high resilience PTFE material, high temperature corrosion resistance.
The double-decked serpentine condenser is designed, with a chill down area of 0.15m2 and an evaporation capacity of 22ml/min; it has an anti-dry burning and power failure and an independent temperature limit alarm system to ensure safe and reliable operation.
Double-decked serpentine coil condensation design, chilled down area of 0.15m ², maximum evaporation capacity of 22ml/min, with automatic lifting function and anti-dry burn Safety protection, to ensure efficient and safe Sample Handling.
Using extrusion process and chrome plating surface, the wet film thickness can be as low as 1.5 μ m, and the groove design is wide to improve the Coating Weight, which solves the problem of traditional steel wire loosening and cleaning difficulties, and realizes stable ultra-thin Spreader.
The wet film thickness can be as low as 1.5μm to achieve ultra-thin Spreader; the bottom of the groove is wider, and the Coating Weight is larger; the extrusion process is adopted to avoid the problem of loose wire and broken wire, and it is easy to clean.
Travel 0-1.25 mm, measurement error +/- 1HAM, suitable for thin rubber samples with a thickness of 1.5mm or more. Sensitivity is high, and it needs to be used with a constant load measuring rack to ensure Precision.
Echo-echo technology implementation of 0.15mm ultra-thin part measurement, resolution of 0.001mm, can penetrate 0.5mm coating measurement substrate Film thickness, support sound speed calibrated and difference mode settings.
Using a formed pRoduction process, the film Film thickness is as thin as 4.6μm, the accuracy is up to 0.1 micron, and the effective Spreader width is 30cm. It can be used with an automatic Film Applicator and has the advantage of continuous wire.
Linear dispersion surface is formed by cold extrusion processing technology, no risk of wire loosening, wet film thickness 50 μ m, can achieve ultra-thin film Spreader, smooth surface and easy to clean.
Wet film thickness can be as low as 1.5μm, support ultra-thin Spreader; use extrusion process and chrome plating surface to reduce clogging and disconnection problems, groove design to optimize Coating Weight, adapt to a variety of substrate needs.
