Automatic ink running stability, ink time and speed can be set, printing pressure 0~ 2mm adjustable, provide low, medium and high three printing speed, each time can be proofed 4 colors to facilitate Color contrast.
Using microcomputer automatic control, the ink wiping speed is 15.5 +/- 1.0cm/min, the opening area of the ink coating platen is 20 +/- 0.4cm ², and the automatic adjustment range of paper pattern thickness is supported by 0.1~ 1.0mm. Test accuracy and operation convenience are ensured.
Adopt automatic ink leveling system, ink leveling time adjustable, three-speed ink leveling speed 400-700rpm, printing speed 0-1000rpm frequency conversion adjustable, equipped with German imported rubber roller, support different materials substrate.
The equipment supports 0-2MM pressure adjustment, providing three-speed printing speed (10/15/20 rpm) and uniform ink speed (650/800/1000rpm), which can imprint 2.5mm thick paper and 1mm plastic film to achieve precise uniform ink and stable operation.
It can simultaneously print color bars of different Colors or Ink Film thickness, detect inks Hue and Gloss, uniform ink time can be adjusted from 1 to 800 seconds, support dry and wet ink discoloration analysis and abrasion resistance testing.
Using 15.5cm/min ink wiping speed, equipped with 0.1mm ink coating platen, the test process is precisely controlled by 4.3 inch Touchscreen, which can accurately determine the absorption capacity of the material to the inks vehicle.
Adjustable pressure 0~ 2mm, support three uniform ink speed 650-1000rpm and printing speed 10-20rpm, automatic uniform ink function to ensure stable operation, suitable for different thicknesses of paper and plastic film proofing comparison.
The ink wiping speed of the instrument is 15.5 +/- 25px/min, the ink absorption time is 120 +/- 5s, and the 4.3 color Touchscreen control can accurately evaluate the acceptance of inks and the absorption capacity of the vehicle.
Controlled by single chip microcomputer, temperature accuracy +/- 0.03 ℃, kinematic viscosity measurement range 0.5~ 20000mm ²/s, automatic tracking of heating Linear dispersion and precise control of water Bath and oil Bath temperature.
The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
The ink wiping speed is 15.5cm/min, the opening area of the ink coating platen is 20cm ², and the ink absorption time is 120s. The test process is automatically controlled to accurately determine the absorption capacity and penetration performance of the paper to inks.
The multi-stage color development structure can simultaneously print 4 color strips of different thicknesses or Hue, and the uniform ink speed can be adjusted by 500-800rpm in three gears. With the Basis Weight instrument, the ink layer thickness is precisely controlled, and the operation is simple and durable.
Using 10L Glass Bathtub, small size and less medium consumption, temperature control accuracy of +/- 0.05 ℃, automatic accurate timing and viscosity calculation, support 4 holes at the same time experiment, easy and reliable operation.
The ink wiping speed is 15.5 +/- 1.0cm/min, the opening area of the ink coating platen is 20 +/- 0.4cm ², and the ink absorption time is 120 +/- 5s. It is controlled by 4.3 inch color Touchscreen, which is suitable for the absorption performance measurement of paper inks.
Using 140 wire metal anilox roller to control ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and high repRoducibility.
