Cube Applicator can achieve 70/150μm double-sided Film thickness Spreader, through the hardening process to ensure that the overall uniform hardening, Spreader width 12mm, guide plate design for narrow Glass panel direct use.
With bar +/- 0.001mm and Drawdown blade +/- 0.003mm High Accuracy Spreader capability, support 1-300mm/s stepless speed regulation. The clamshell Drawdown blade design is easy to clean, Glass plate countertop ensures Spreader flatness, and optional heating function enhances adaptability.
Glass material ensures that the film is flat, used with wire Rod or Film Applicator, the specification size is 110 * 180mm, and the operation is simple and efficient.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Adopting 500 * 700mm Dimensions, used with bar or Film Applicator, is conducive to the smooth and effective film, and improves the convenience of film operation.
Glass plate with 440 × 180 × 8mm size is used to ensure uniform film surface, chemical corrosion resistance and easy cleaning and maintenance, providing accurate film evaluation results.
Using ASAB Stavax ESR stainless steel tool steel after zero degree vacuum hardening, hardness HRC55, double-sided design provides 50/100μm two Film thickness, Spreader width 12mm, accuracy +/- 2μm, guide plate removable for narrow panel operation.
Glass material is conducive to film flatness, size 230 * 340mm, with wire Rod or Film Applicator for scraping operation is more effective.
Through hardening process to ensure uniform overall hardening, longer service life accuracy and more stable, providing 38/76μm double-sided Film thickness selection, Spreader width 12mm accuracy of +/- 2μm, equipped with removable guide plate for narrow Glass panel operation.
Using ASAB Stavax ESR stainless steel tool steel vacuum hardened, hardness HRC 55, double-sided design provides two film thicknesses of 50/100 μm, accuracy of +/- 2 μm, equipped with guide plate to ensure direct stretching on narrow Glass panel.
The fitting specially designed for hardness Gauges, made of Glass plate, can provide a stable test platform to ensure the accuracy and Repeatability of Hardness measurement results.
Using 160 * 280mm size, with wire Rod scraping ink to ensure that the film is flat, Glass table is conducive to operation and observation effect.
Using the principle of polarized light interference, equipped with 560nm full-wave plate, determinable or semi-Basis Weight measurement of internal stress, the aperture of the polarizer is 150mm, which supports continuous and rapid analysis of transparent materials.
Microcrystalline Glass panel resistant to strong acid and alkali, low expansion coefficient to ensure high temperature without deformation, the highest Operating temperature 450 ℃, surrounded by 316L stainless steel material comprehensive corrosion resistance.
Using the principle of polarized light interference, equipped with a 560nm full-wave plate, the light diaMeter of the Analyzer is 150mm, which can quickly and continuously analyze the internal stress of transparent materials and support qualitative or semi-Basis Weight measurement.
