The stainless steel pendulum pipe is used to achieve +/- 180 degree swing, equipped with 25 water spray holes and 1-4 rpm adjustable turntable, supporting 50-100kpa water pressure adjustment, and the test water can be recycled without additional waterproof treatment.
With +/- 180 degree swing tube swing and 1~ 4 rpm adjustable sample holder speed, support 50~ 100kpa water spray pressure and 99 hour time setting, and use stainless steel structure to achieve accurate water test.
Adopt stainless steel pendulum tube to achieve +/- 180 degree swing, equipped with 25 0.4mm nozzles, flow adjustment range 100-1000L/h, support sample holder 1-4 rpm adjustable speed, test water can be recycled.
The liner is made of SUS304 mirror stainless steel, the radius of the water spray ring is 375/500mm, the pendulum tube swing supports +/- 45 ° to +/- 180 ° multi-angle adjustment, and is equipped with visual observation window and safety protection system.
The liner is made of SUS304 mirror stainless steel, the diaMeter of the water spray hole is 0.4mm, the maximum swing of the pendulum pipe is +/- 180 °, and it is equipped with a visual observation window and a flow Meter water pressure control to ensure the test accuracy.
Using SUS304 stainless steel liner and galvanized steel shell, the diaMeter of the water spray hole is 0.4mm, and the swing of the pendulum pipe can reach +/- 180 °. It supports the water pressure control of the flowMeter and the stepless speed regulation of the test bench, and has the function of leakage protection.
The liner is made of SUS304 mirror stainless steel, with a water spray ring radius of 375 or 500mm and a swing tube swing of +/- 45 ° to +/- 180 °, which supports water pressure control and visual observation of the flowMeter.
Adopting a stepper motor automatic positioning and electromagnetic release system, the swing period is 1.4 seconds, and the steel ball diaMeter is 5 mm, providing visual and acoustic test end signals.
Adopting double swing bar design, steel ball diaMeter 8mm, swing period 0.625s, automatic counting function, accurate measurement of film resilience changes, easy to operate.
The equipment has a 15-liter large-capacity water Tank and an 8mm inner diaMeter water pipe, supports 0 to 99 hours of time control, adopts stainless steel structure and automatic control device, and is suitable for coating stain resistance testing.
With 6 sets of fixtures and 45 ° to 180 ° multi-angle adjustment ability, swing speed 10-60c.p.m. adjustable, automatic detection of disconnection and stop, load range 50-500g, improve Test accuracy and efficiency.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
Impact accuracy is ensured by double-tube guide structure, the maximum impact energy can reach 320J, the impact height error is controlled within +/- 2mm, and the automatic hammer lifting function is equipped to prevent secondary impact.
The stepper motor is used to achieve fully automatic positioning, the electromagnetic system releases the swing Rod, the Persoz swing Rod cycle is 1 second, and the swing time on the flat Glass is 430 +/- 15 seconds. There are visual and acoustic signals at the end of the test.
Using 500g swing Rod mass and 8mm steel ball diaMeter, automatic counting function can accurately measure coating surface Hardness, swing cycle of 1 second to achieve efficient testing.
