The cone shaft length is 203mm and the large end diaMeter is 38mm, which can test the cone bending resistance of a single layer or the entire coating system separately. Operating temperature is 23 +/- 2 ℃ and relative humidity is 50 +/- 5%.
Range 5-50p, accuracy of +/- 2%, equipped with 5 kinds of special calibrated oil to ensure measurement accuracy, as the core component of cone-plate viscoMeter to ensure test Stability.
The fastest acceleration time is less than or equal to 6 seconds, and the fastest deceleration time is less than or equal to 5 seconds. It is equipped with instantaneous centrifugal function, door cover protection, and imBalance detection system to ensure safe operation.
Large diaMeter centrifugal wind turbine to ensure uniform heat flow, Temperature range RT + 5~ 250 ℃, Temperature Accuracy +/- 1 ℃, with microcomputer PID self-tuning and timing function, suitable for long-term continuous use.
Adopting a low-energy centrifugal fan and a reasonable air duct design, the airflow is uniform and stable; the average wind speed is 0.25 to 0.45m/s, and the noise is less than or equal to 62dB (A); the mirror stainless steel countertop is corrosion-resistant and easy to clean, and the standard initial effect and effective Filter meet the purification level.
Large diaMeter centrifugal wind turbine to ensure uniform heat flow, Temperature range RT + 5~ 250 ℃, Temperature Accuracy +/- 0.5 ℃, suitable for long-term uninterrupted use, optional independent thermostat to enhance safety.
Measurement accuracy +/- 2%, equipped with 5 calibrated oils to ensure measurement accuracy, as a special accessory for cone-plate viscoMeter to achieve stability testing.
Measurement accuracy of +/- 2% with a cone rotor range of 0-10p, requires only 30 μl of sample volume, and provides 5 calibrated oils to ensure measurement accuracy.
Measurement accuracy of +/- 2% with a range of 10-100p, 5 calibrated oils for measurement accuracy, High Accuracy rotor designed for cone-plate viscoMeters.
Adopting a low-energy centrifugal fan and a reasonable air duct design, the airflow is uniform and stable; it is equipped with an initial effect and an effective filter to meet the requirements of the purification level; the average wind speed is 0.25 to 0.45m/s, and the noise is less than or equal to 62dB (A), making it convenient and efficient to operate.
Viscosity measurement range 0-5p, accuracy +/- 2%, equipped with 5 special calibrated oils to ensure measurement accuracy, High Accuracy rotor designed for cone-plate viscoMeters.
Vertical design, motor and drying system separation, small vibration, low noise, high dehydrating efficiency, Rotation speed of 2800 rpm, dehydrating weight 0-500g, accurate timing, easy to use.
Rotation speed increases with the folding structure automatically adjust the blade angle, pulp diaMeter 90mm, 300mm Rod length, suitable for narrow container stirring, stable operation in high speed.
Rotation speed increases with the folding of the two blades, pulp diaMeter 90mm, 400mm Rod length, suitable for high-speed mixing operation in narrow containers.
Folding design two blades with increasing speed and expansion, pulp diaMeter of 90mm, suitable for high-speed mixing in narrow containers, stainless steel to ensure durability.
