Wire-wound design can be prepared 160 micron wet film thickness, corrosion resistant stainless steel material, suitable for high viscosity test and not easy to block, longer service life.
Wire-wound structure design, wet film thickness 160 microns, suitable for high viscosity test is not easy to block, 303 stainless steel material corrosion resistance, longer service life.
Wire-wound design to achieve 171.5 micron wet film thickness, stainless steel corrosion resistance and not easy to break wire, application width 300mm to ensure uniform coating, suitable for thick film preparatory needs.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Adopting 500 * 700mm Dimensions, used with bar or Film Applicator, is conducive to the smooth and effective film, and improves the convenience of film operation.
Hardness stainless steel material, Hardness of 50~ 55HRC, film accuracy +/- 2μm, smooth surface to support a variety of Spreader requirements, can be used with Film Applicator to achieve automatic film operation.
Using a formed pRoduction process, the film Film thickness is as thin as 4.6μm, the accuracy is up to 0.1 micron, and the effective Spreader width is 30cm. It can be used with an automatic Film Applicator and has the advantage of continuous wire.
Spreader width 100mm, wet film thickness 40μm, wear resistant corrosion resistant alloy steel material, can be manually operated or with automatic Film Applicator to ensure coating conformity and Repeatability.
Double-sided design can be coated with two pre-order film thicknesses 90 and 150 μm, Spreader width 20mm, suitable for Automatic Film Applicator and Drying Time Recorder, in accordance with ASTM D 823 standard.
Formed to achieve 52.6 micron precision film, 304 stainless steel material provides high Abrasion Resistance, 50mm at both ends of the hand part without additional handle, can be directly matched with the experimental Film Applicator.
Measurement range of 50~ 7600 μm, error +/- 3%, suitable for thick soft coatings such as polyurea and asphalt neoprene, providing accurate thickness detection.
Spreader width 100mm, wet film thickness 37.5μm, wear-resistant corrosion-resistant alloy steel material, can be used manually or with automatic Film Applicator to ensure coating conformity and Repeatability.
The formed pRoduction process ensures uniform film, wet film thickness of 110μm, total length 250mm with 250mm application width, 304 stainless steel material provides durability and accurate Spreader effect.
Hard stainless steel material corrosion resistance, can be prepared four different thickness wet-film, application width 80mm, operation only need to change the angle can quickly switch film thickness.
Wire-wound design to achieve 171.5 μm wet film thickness, stainless steel corrosion resistance and strong structure, application width 300mm to ensure uniform film formation.
