Wall-Mounted waterproof structure is equipped with PTFE anti-clogging dialysis membrane, supports 0.0-14 pH Measurement range and +/- 0.2pH accuracy, alarm point can be set at 3-11pH, LED light reminder when the setting exceeds +/- 0.5pH, extending ElectRode life.
The small design is only 23x20cm, the maximum centrifugal force is 500xg, and the speed is 2500rpm. It can handle 2x96 hole plates, avoid liquid leakage by vertical loading, and improve the experimental efficiency.
Using PID Sensor technology, range 0~ 500ppm, resolution 0.1ppm, support 1-6 Sensor expansion, with a variety of signal output modes, including 4-20mA, RS485 and relay output, Protection Rating IP65, suitable for harsh environments.
Pump-suction sampling and PID Photoion Sensor technology, Response Time ≤ 20 seconds, resolution of 0.001 ppm, IP65 Protection Rating and explosion-proof certification, support for multi-Sensor expansion and Data storage functions.
It can simultaneously detect 7 paraMeters such as PM2.5, formaldehyde, and TVOC, with an accuracy of +/- 10%. It is equipped with a 2.8-inch true color screen to display real-time trend charts, and supports 5000 data records and dual national standard selection.
Using 32-bit microprocessor and 24-bit ADC chip, equipped with 2.4-inch high definition display, supports 1-6 Sensor configurations, with 4-20mA, RS485 and other signal output, Protection Rating up to IP65, Response Time ≤ 20 seconds.
Using ultra-low VOC background concentration control technology, background concentration formaldehyde ≤ 0.006mg/m ³, equipped with independent variable frequency wind speed adjustment device, Modular design is easy to maintain, and the operating power is as low as 1.2kw.
With bottle bottom and bottle wall double measurement function, test resolution of 0.001mm, no power supply, easy and fast operation, suitable for large bottles such as wine bottles and infusion bottles.
Using MCU chip to achieve low power consumption operation, detection error ≤ +/- 3% F. S, Response Time ≤ 30 seconds, with explosion-proof structure and a variety of signal output interfaces, support remote monitoring and linkage control.
Pump-suction sampling and imported Electrochemical sensor, Response Time ≤ 20 seconds, resolution 0.01ppm, support 1-5 Sensor expansion, IP65 Protection Rating, suitable for harsh environments.
Wall-mounted spray tower saves space, atomization particles are fine and uniform; Titanium alloy heating pipe with Hot Plate improves Temperature uniformity, energy consumption is reduced by about 50%; support automatic water inlet and water shortage protection, test area temperature error +/- 2 ℃.
With bottle bottom and bottle wall double measurement function, test resolution of 0.001mm, no power supply, easy and fast operation, suitable for small volume bottles such as ampoules and vials, general structure design is simple and durable.
Adopt ultra-low VOC background concentration control technology, background concentration formaldehyde ≤ 0.006mg/m ³; equipped with independent variable frequency wind speed adjustment device, the wind speed range is 0.1-1 m/s; Modular design is easy to maintain, and the integrated gas supply purification system is easy to operate.
Pump-suction sampling and PID photoion technology, detection accuracy of +/- 3%, Response Time ≤ 20 seconds, IP65 Protection Rating and explosion-proof certification, support for multi-Sensor expansion and Data storage functions.
Pump-suction sampling and a variety of detection principles, Response Time ≤ 20 seconds, accuracy ≤ +/- 3%, built-in 3800mAh battery, support 120,000 sets of Data storage and Temperature Humidity detection.
