Using 160 line metal anilox roller and rubber roller combination, print width 70mm, suitable for inks proofing, wet film thickness and the number of lines inversely proportional, proofing authenticity and easy to operate.
Pressure adjustable range -1 to + 1mm, proofing speed support 400-700rpm three-speed frequency conversion speed regulation, uniform ink time 15-800 seconds adjustable, fixed structure to ensure proofing Stability.
Ceramic roller structure, line number standard 600LPI can be customized 70-1200 lines, BCM range 1.6-5; drawdown blade, ceramic roller and other components can be individually adjusted left and right pressure, proofing speed 0-80 m/min adjustable, support material thickness 0.01-2 mm.
Adopt circular embossing method to improve the fit, the proofing speed is adjustable from 0-300rpm, equipped with High Accuracy Servo Motor and quick replacement anilox roller system, support a variety of gray scale customization.
Four-speed proofing speed is optional, up to 45m/min, using flat engraving plate for direct printing, supporting 95 × 149mm concave sample range, suitable for fast proofing of flexible substrates.
Equipped with rigid polyester board and foam rubber cushion, size 11x18cm, can absorb proofing pressure, improve Repeatability and proofing effect, suitable for a variety of substrate detection.
150 line metal anilox roller and 70mm print width, quadrilateral pyramid mesh design to ensure uniform Spreader, proofing intuitive real, suitable for a variety of liquid Coating Spreader.
Using ceramic roller synchronous rotation technology, the thickness of the proofing material supports 0.01~ 2mm, the uniform ink speed is 10-80m/min, the pressure can be adjusted by +/- 2mm, and the structure is flexible and easy to disassemble.
Using nitrile rubber material, length 100mm diaMeter 20mm, with excellent oil resistance and aging performance, suitable for inks proofing operation.
Using formed process, wet film thickness 18μm, application width 300mm, 304 stainless steel material to ensure durability and accurate Spreader effect.
Using a formed pRoduction process, the film thickness is 47 microns, the application width is 250mm, and the 304 stainless steel material ensures durability and Spreader uniformity.
Using rigid polyester plate with foam rubber cushion, size 240x340mm, can absorb operating pressure, improve proofing Repeatability and uniformity, suitable for a variety of substrate testing.
Equipped with strong clip fixed Spreader cardboard, four rubber foot pads at the bottom are non-slip, size 230 × 160 mm, weight 1.6 kg, improve Spreader Smoothness and Proofing Repeatability.
Adopt stainless steel corrosion wire-wound, Abrasion Resistance, film thickness 102.9μm, application width 300mm, suitable for laboratory film proofing.
Using formed pRoduction process, the film thickness is 80μm, the application width is 300mm, and the accuracy is up to 0.1μm. It is suitable for the experimental environment with high film accuracy requirements.
