Adopt trapezoidal screw drive and integral nut design, rated load 500N, Travel 150mm, can be firmly clamped to prevent partial load, fast loading and unloading to improve measurement accuracy, vertical and horizontal dual-use to adapt to a variety of test scenarios.
Support 20 °/60 °/85 ° three-angle measurement, Measurement range 0~ 200GU, Repeatability +/- 0.5GU, Stability +/- 0.4GU, can store 254 sets of data and have Automatic calibration function.
Single angle 60 ° measurement, Stability 0.4GU, Repeatability 0.5GU, Automatic calibration without manual operation, can store 254 sets of data, lightweight and portable design.
Using one-piece casting process, strong and not easy to deform, maintaining test parallelism; Measurement range 0~ 4mm, resolution 0.01mm, contact pressure 100 +/- 10kPa, contact area 2 +/- 0.05cm ², in line with standard requirements.
Provide an additional one-year warranty period, which is applicable to Coating thickness Gauge pRoducts. It needs to be purchased simultaneously when purchasing the equipment and is not sold separately.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
The stainless steel material is durable, the range is 10~ 100μm Division 10μm, the unilateral design is convenient for vertical pressing into the wet-film measurement, and the number of teeth 10 can accurately read the thickness value between the infiltrated and uninfiltrated teeth.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
The integral pump structure is adopted, and the forced oil pump lubrication system ensures stable operation. Ultimate vacuum degree reaches 5x10 ^ Pa, and the noise is only 58dB. The special gas ballast valve can efficiently extract steam without polluting the oil quality.
Measurement accuracy of 0.01mm, measurement pressure of 20 +/- 0.5kpa, can maintain good parallelism, suitable for film thickness test below 20mm.
Measurement range 0-20mm, accuracy 0.01mm, contact pressure 20 +/- 0.5kPa, contact surface diaMeter 35.7mm, suitable for a variety of sheet material thickness detection, to ensure high parallelism and Precision.
Made of stainless steel, durable and repeatability; range 20~ 200μm, Division 20μm, step number of teeth 10, unilateral design is convenient for vertical pressing into wet-film measurement, in line with international standards.
Measurement range 0-4mm, resolution up to 0.001mm, contact pressure 100 +/- 10kPa, measurement surface parallelism ≤ 0.002mm, to ensure accurate and reliable thickness measurement.
Measurement range 0-6mm, accuracy of 0.01mm, contact pressure 100 +/- 5kpa, with digital display function and stable parallelism measurement, suitable for a variety of materials Film thickness detection.
Measurement range 0-20mm, Graduation 0.01mm, Contact pressure 20 +/- 2kPa to ensure High Accuracy measurement; 1000 +/- 20mm ² Sensor with parallelism ≤ 0.035mm provides stable and reliable thickness detection.
