Fully enclosed metal Furnace body to enhance Baseline Stability, with imported alloy Sensor to enhance corrosion resistance; Temperature range covering room temperature to 600 ℃, support 0.1~ 100 ℃/min program temperature control, with 0.001 ℃ resolution and Automatic calibration function.
Imported electrochemistry/catalytic combustion Sensor, Fast Response and High Measurement accuracy. Built-in 4000mAh large-capacity battery, equipped with 2.4 inch high definition color screen, support Data storage and export, with two-level sound and light alarm function.
Adopt drawdown Bar & Blade heating Vacuum chuck four-in-one function, coating speed 5~ 200mm/s adjustable, Spreader thickness range 0.001~ 10mm, equipped with automatic feeding system and Vacuum chuck fixed to ensure uniform and stable film.
Imported Electrochemical sensor, Response Time ≤ 20s, detection accuracy ≤ +/- 3%, built-in strong air pump can work in micro negative pressure environment, with Data storage and Temperature Humidity detection function, adapt to various harsh occasions.
Four-channel configuration with K-type Thermocouple, the sampling rate can be adjusted from 1 second to 1 minute, and the thermal insulation performance can last for 60 minutes in a 500 ° C environment to achieve full temperature tracking monitoring.
Four-channel K-type Thermocouple with 0.5% accuracy, the insulation box can work continuously for 1 hour in a 300 degree environment, supports multi-rate sampling and 16000 Data storage, Stability is high and easy to operate.
Using electrochemistry and catalytic combustion Sensor to detect EX/O2/CO/H2S four gases, Response Time is less than 30 seconds, with waterproof ABS shell and sound and light vibration triple alarm, battery life of 8 hours.
Enclosed aluminum silicate Furnace and nickel-chromium-aluminum alloy heating wire are used to reduce volatile gas corrosion; three-sided heating method combined with PID control, Temperature Fluctuation +/- 5%, accurate and stable temperature control.
Maximum temperature 1000 ℃, temperature control accuracy 1 ℃, using high aluminum liner and upper and lower left and right 4-sided heating design, with 30 program settings and over-temperature protection function, uniform temperature in the Furnace.
Adopting drawdown Bar & Blade heating Vacuum chuck four-in-one design, Spreader accuracy is up to +/- 0.005mm, and the rate is adjustable from 5 to 180mm/s. Spreader is uniform and stable by controlling speed and pressure.
The maximum temperature is 1200 ° C, the Furnace volume is 16L, and the 30-segment programmable control is used to achieve precise temperature control. The safety switch of the Furnace door and the design of the corrosion resistance Furnace improve the operation safety and durability.
Maximum temperature up to 1200 ℃, temperature control accuracy 1 ℃, with 30 program settings and over-temperature protection function, full range programmable automatic control of heating thermostatic, Furnace size 400 * 250 * 160mm.
With 30-stage programmable control function, the maximum temperature is 1000 ℃, the Furnace volume is 2L, the refractory brick Furnace and stainless steel material are used, and the heat loss is small and the Temperature uniformity is good.
The highest temperature up to 1000 ℃, Furnace volume 16L, the use of refractory brick Furnace and wirecoil for heater heating, with automatic safety switch and overheating and overpressure protection, Furnace door sealing good heat loss is small.
The highest temperature is 1400 ℃, the Furnace volume is 4.5L, and the aluminum oxide fiber Furnace and silicon carbon Rod heating elements are used to support the inert gas environment and ensure the uniform and stable sintering of the material.
