The equipment operates under vacuum or pressure conditions, with a processing viscosity of 10000MPas, Operating temperature of 170 ° C, equipped with anchor type screw scraping wall stirring slurry and high shear homogeneous Mulser, supporting Multi-ParaMeter measurement such as material temperature and pressure.
Made of stainless steel, the slurry diaMeter is 50mm, the Rod length is 400mm, the mixing performance is mild, the tangential flow is generated during medium and low speed operation, the turbulence is small and the heat exchange effect is good.
The speed can reach 30000rpm, the processing capacity is 0.1-1000 ml, the 316L stainless steel dispersion head is corrosion-resistant and high temperature-resistant, and the handheld lightweight design is easy to operate with one hand. It is suitable for rapid shearing and crushing of samples in small containers.
Made of stainless steel, the diaMeter of the slurry is 50mm, the Rod length is 350mm, and the medium and high speed stirring performance is stable, which is suitable for mixing operations of various medium and low viscosity liquids.
Made of stainless steel, the diaMeter of the slurry is 50mm, the Rod length is 300mm, and the stirring performance is mild, which is suitable for medium and low speed working conditions and can achieve a soft stirring effect.
The stirring performance is mild and suitable for medium and low speed use, the slurry diaMeter is 100mm and the Rod length is 500mm, and the tangential flow turbulence is small and the heat exchange performance is good.
Using white water circulation and electric water supply system, equipped with bubble homogenization and manual homogenization dual-use functions, the diaMeter of the extraction cylinder is 200mm, the capacity is 10 liters, and the sealing and clamping device avoids burring leakage.
With 70mm diaMeter slurry and 8mm Rod diaMeter design, the mixing performance is mild, suitable for medium and low speed operation, can effectively handle the medium that needs gentle stirring, and avoid excessive turbulence.
Speed range 13000-34000rpm, Processing capacity 30-800ml, stainless steel working head and PTFE bearing, suitable for liquid homogenization and cell crushing with a viscosity of 5000mPa.s.
Made of stainless steel, the slurry diaMeter is 50mm, the Rod length is 350mm, the tangential flow is generated during stirring, the turbulence is small, the heat exchange performance is excellent, the performance is mild, and it is suitable for medium and low speed operation.
Complete 48 Sample Handling within 1 minute, adopt fully enclosed design to avoid cross-contamination, support 0-70Hz homogenization speed and low temperature grinding mode, and the noise is lower than 55dB to ensure a quiet experimental environment.
The four-blade structure makes the mixed medium flow radially up and down, forming strong turbulence and high shear force. The diaMeter of the slurry is 80mm, which is suitable for medium and high viscosity liquids and can effectively crush the particles in the liquid.
When stirring, tangential flow is generated, turbulence is small, heat exchange performance is good, slurry diaMeter 100mm, Rod length 400mm, suitable for medium and low speed use, mild stirring performance.
Made of stainless steel, the diaMeter of the slurry is 100mm, the Rod length is 300mm, and the tangential flow is generated during stirring, the turbulence is small, and the heat exchange performance is good, which is suitable for medium and low speed gentle stirring.
Made of stainless steel, the diaMeter of the slurry is 100mm, the Rod length is 350mm, the tangential flow is generated during stirring, the turbulence is small, and the heat exchange performance is good, which is suitable for medium and low speed mild stirring applications.
