The large sink design is used to reduce buoyancy errors, and Brazilian fire gold with coating thickness > 30μm can be tested with a density accuracy of 0.0001g/cm ³, which supports the analysis of the mixing ratio of various precious metals.
The large sink design is used to reduce buoyancy error, the density accuracy is 0.001g/cm ³, and the Brazilian fire gold with coating thickness > 30μm can be tested, and the mixing ratio of various precious metals can be measured.
Density accuracy of 0.001g/cm ³, maximum weighing 310g, built-in density reference can be customized settings, support solid liquid powder and Water Absorbency sample testing, equipped with level indicator and overload alarm function.
Measurement accuracy of 0.001g/cm ³, support temperature compensation and mixed specific gravity measurement, can cycle display K number and purity%, with over-limit prompt function, operation only needs two steps.
Measurement range 5-600g, density accuracy 0.001g/cm ³, with temperature compensation and mixing ratio measurement function, without leaving traces after testing.
Measurement principle of hanging water method, density accuracy of 0.001g/cm ³, support one key zero and temperature compensation function, can cycle display K number and purity percentage, and have mixed specific gravity determination and over-limit prompt function.
Measuring wet-film flow thickening in the vertical state, controlling the physical performance of the coating to select the appropriate wet film thickness to ensure uniform film thickness, Film thickness range 450-675μm, in line with GB/T 9264 and ASTM D 3730 standards.
In line with ISO2808-1974 standard, the range is 0~ 150μm, the accuracy is not more than 5μm, can measure the wet film thickness and estimate dry-film thickness, suitable for laboratory and pRoduction control.
The formed pRoduction process is adopted, the wet film thickness is 42 μm, the application width is 60mm, the preparatory coating is uniform and the film thickness is accurately controllable, which is convenient for comparative analysis by conversion of dry-film thickness by Solid content.
Using smooth steel bar design, no winding steel wire or pressurized groove, film thickness is 0μm, diaMeter 6.35mm, total length 400mm, suitable for machine control film thickness.
The 4-sided design can complete different thickness films at one time, using wear-resistant and corrosion-resistant stainless steel material, film thickness 150-300μm, application width 105mm, can accurately control wet-film or dry-film thickness.
In line with ISO2808 standard, the range is 0~ 500μm, the accuracy is not more than 5μm, can measure the wet film thickness and estimate dry-film thickness, suitable for laboratory and pRoduction site.
304 stainless steel material, wet film thickness of 200 μ m, Spreader width of 250mm, formed pRoduction process to ensure uniform film, suitable for precision experimental needs.
Adopt scale differential head to adjust film Film thickness, Graduation 10 μ m, film range 0~ 5000 μ m, accuracy +/- 5 μ m, drawdown blade straightness +/- 2 μ m, die steel drawdown blade wear resistance corrosion resistance.
Spreader formed process to ensure uniform, wet film thickness 36.6μm, application width 300mm, suitable for accurate film thickness control, the total length of 400mm easy to operate.
