The liner is made of SUS304 mirror stainless steel, with a water spray ring radius of 375 or 500mm and a swing tube swing of +/- 45 ° to +/- 180 °, which supports water pressure control and visual observation of the flowMeter.
Using SUS304 stainless steel liner and galvanized steel shell, the diaMeter of the water spray hole is 0.4mm, and the swing of the pendulum pipe can reach +/- 180 °. It supports the water pressure control of the flowMeter and the stepless speed regulation of the test bench, and has the function of leakage protection.
The liner is made of SUS304 mirror stainless steel, the radius of the water spray ring is 375/500mm, the pendulum tube swing supports +/- 45 ° to +/- 180 ° multi-angle adjustment, and is equipped with visual observation window and safety protection system.
The liner is made of SUS304 mirror stainless steel, the diaMeter of the water spray hole is 0.4mm, the maximum swing of the pendulum pipe is +/- 180 °, and it is equipped with a visual observation window and a flow Meter water pressure control to ensure the test accuracy.
The use of low-energy centrifugal fans makes the airflow uniform and stable, with an average wind speed of 0.25 to 0.45m/s and noise less than or equal to 62dB (A). The mirror stainless steel countertop is corrosion-resistant and easy to clean, and the tripod and cabinet are separated for easy transportation.
With +/- 180 degree swing tube swing and 1~ 4 rpm adjustable sample holder speed, support 50~ 100kpa water spray pressure and 99 hour time setting, and use stainless steel structure to achieve accurate water test.
Adopt stainless steel pendulum tube to achieve +/- 180 degree swing, equipped with 25 0.4mm nozzles, flow adjustment range 100-1000L/h, support sample holder 1-4 rpm adjustable speed, test water can be recycled.
The stainless steel pendulum pipe is used to achieve +/- 180 degree swing, equipped with 25 water spray holes and 1-4 rpm adjustable turntable, supporting 50-100kpa water pressure adjustment, and the test water can be recycled without additional waterproof treatment.
Equipped with five Illuminant system, supports D65, TL84 and other Standard light sources, the interior is coated with Moncel gray N5.5, the width is 60cm, and the multi-point Illuminant observation system enhances the accuracy of color evaluation.
Adopt 8.0mmPP polypropylene (PP) plate welding, acid and alkali resistance and corrosion resistance, surface wind speed 0.4-0 m/sec, noise is less than 65dB, the baffle can be disassembled, and the window is safe and durable.
Six kinds of Illuminant are optional, with Metamerism function, no need to preheat and do not flash, fast and reliable detection; low energy consumption, no heat, high luminous efficiency, can display Illuminant use time and switching times.
With Metamerism function, no need to warm up without flashing, including seven kinds of Illuminant including D65 (6500K) and UV (365nm), automatically switch Illuminant and display the use time.
Standard light sources covering 6500K to 2700K Color temperature range, support UV detection; no need to warm up and open immediately, low energy consumption without heating; Illuminant use time can be displayed, with 45 ° standard stand optional.
Imported matte aluminum reflector to achieve uniform lighting, equipped with six kinds of Illuminants including D65 and UV, table size 700 * 530mm to meet a variety of color requirements.
The stainless steel mirror heating Chamber and intermittent continuous heating technology are used to heat the sample evenly, with a heat-resistant temperature of more than 200 ° C. Equipped with HBM Sensor, it can remember multiple sets of drying processes and support three heating modes.
