Suitable for a variety of Corrugated Board adhesive strength test, equipped with different specifications of steel needles, needle diaMeter range 1.0-3 mm, support A, B, C, E corrugated test, sample size 25 × 80mm.
Can cut 25 * 100mm sample, sampling error +/- 0.5mm, sampling thickness range of 18mm, fast and accurate completion of Corrugated Board Edge Crush Test and adhesive strength test sample preparation.
The fixture can fix the upper and lower ends of the butterfly specimen into a vertical shape, test the vertical compression strength, suitable for a variety of Corrugated Board types, Dimension 150 * 105 * 65mm, weight about 2Kg, easy to operate.
Thrust sampling mode, cutting edge pressure sample 25mmx100mm and gluing sample 25mmx80mm, sampling thickness range of 18mm, suitable for Corrugated Board and carton mass detection.
Equipped with long and short pin holders and Φ 3mm and Φ 2mm pins, the pin axis is less than 1/100 after the parallelism error combination to the bottom surface, and less than 1/200 when the force is 300N, making it easy to operate without adjustment.
Maximum compressire strength 50KN, platen size 1200 * 1200mm, with three test modes of compressire strength, stacking strength and fixed distance, support 7-inch Touchscreen operation and thermal printing function.
It is compacted by 14,000 tons of hydraulic press, with a density of 1.5-1 g/cm ³ and a flexural strength of air drying ≥ 21Mpa. It has A-class non-combustibility, sound insulation and heat insulation, water resistance and moisture resistance performance, convenient construction and green environmental protection.
5-Inch color Touchscreen is easy to operate, Measurement range 0-48J covers a variety of gears, equipped with thermal printer and RS232 interface, steel structure design reduces test vibration energy loss.
Equipped with A/B/C/E four kinds of corrugated pins, the diaMeter of the pins is Φ 2-3mm, the straight line is arranged without bending, and the unit length Corrugated Board gluing line can be separated to meet the testing needs of different sizes of paper pRoducts.
The imported sliding track is used with the blade to cut multi-layer Cardboard samples, the sampling size error is +/- 0.5mm, the sampling thickness range is 18mm, the scale laser engraving is clear and wear-resistant, and the strong magnet is convenient for blade installation.
Support 100 ° C high temperature treatment, compatible with 96-well 0.2ml standard board design, can be matched with a variety of centrifuge tube modules, to achieve flexible experimental configuration and efficient Sample Handling.
The linear guide is used to ensure smooth and fast sampling, and the imported tungsten sheet is cut without burrs and durable. It supports 18mm thickness sampling, and can cut 25 × 100mm and 25 × 80mm samples.
It can cut 32.2cm ² and 64.5cm ² samples, the sampling error is less than 0.5cm ², and the maximum sampling thickness is 15mm, which meets the accurate sampling requirements of Corrugated Board Flat Crush Test.
Measurement range 0-3000N, accuracy up to +/- 1% of the reading, equipped with 7-inch screen display test Linear dispersion, with automatic conversion of edge pressure strength, ring pressure strength and other functions, support data statistics and micro printing.
Using 3mm thick A3 steel plate and SUS201 stainless steel inner box, the size of each test box is 500 * 500 * 500mm, with pressure relief device and temperature and pressure control, effectively preventing battery explosion and ensuring safe operation.
