Operating Pressure 0-5MPa adjustable, PID intelligent temperature control accuracy +/- 3 ℃, hydraulic system with long-term pressure holding function, press plate Travel 200mm, suitable for hot pressing and hot calendering experiments, to meet the QB/T3703-1999 standard requirements.
The thermostat is used to control the heat transfer of the heating tube, the temperature accuracy is +/- 2 ℃, and the heating range is adjustable from room temperature to 250 ℃; it is equipped with light curtain protection device and temperature abnormal alarm function, and the operation is safe and reliable; the parallelism of the upper and lower templates is within 0.05 to ensure uniform pressure.
The extrusion molding process is used to ensure continuous wire, the film thickness is precisely controlled by 20μm, the application width is 250mm to meet various needs, and the 304 stainless steel material is durable and easy to clean.
Adopt integrated injection molding measurement frame and transparent water Tank, anti-corrosion and drop resistance; density readability 0.001g/cm ³, Capacity 300g; support a variety of liquid media, rapid testing suitable for field applications.
The equipment has 200x200mm hot pressing area, temperature control accuracy +/- 2 ℃, heating temperature up to 250 ℃. Using light curtain protection and safety protection design, the upper and lower templates have high parallelism, and the hot pressing time, temperature and pressure can be adjusted.
Suitable for high voltage molding sand test, compression stroke 2.50mm, load 1500g, with average calculation and MAX Maximum latch function, support USB and Bluetooth data communication.
The equipment adopts dual-station synchronous unwinding and thermostatic hot pressing technology, the bonding speed is adjustable from 2-10m/min, the hot pressing temperature is room temperature to 200 ° C, the line pressure is 5-50N/mm, and it is equipped with automatic deviation correction and full closed-loop tension control to ensure the material alignment accuracy and stable winding.
Horizontal press measurement combined with a physical positioning observation window, with repeatability accuracy dE*ab ≤ 0.02. It supports 5 measurement apertures and over 30 measurement parameters, and enables color data sharing through a mobile application.
Using high frequency principle, Measurement range 0-99.9%, resolution 0.1/0, Response Time 1 second, probe type Sensor can penetrate deep into the material internal measurement, backlight LCD display clear and low consumption.
Rotation speed control is accurate and synchronization performance is good; the height of the casting roller can be adjusted to adapt to different solution strength materials; the surface finish of the hard chrome-plated mirror roller is high, and it is equipped with a circulating water chilling down system. Temperature control accuracy +/- 1 ℃.
Using the principle of Archimedes buoyancy method, density accuracy of 0.001g/cm ³, weighing range of 0.005~ 300g, integrated molding large water Tank design, can measure larger block objects, with temperature compensation and RS-232C interface.
Can be prepative 9.1 micron wet-film, application width 300mm, using formed pRoduction process, suitable for ultra-thin Spreader process, high accuracy.
The formed integrated molding process ensures accuracy, wet film thickness 12 μ m, application width 300mm, 304 stainless steel material, durable and easy to clean.
Using molding process to ensure unbroken wire, film thickness 32.0 μ m, effective application width 300mm, suitable for a variety of Adhesive sample Spreader.
The formed integrated molding process ensures that the structure is firm, the 30 micron wet film thickness precisely controls the Spreader effect, and the stainless steel material is durable and easy to clean and maintain.
