Marine Portable Gas Detector

Marine portable gas detectors use sensors to detect the concentration of oxygen, combustible gases, and toxic gases in ship cabins. They emit audible and visual alarms when gas levels exceed the standard. These devices are used for safety monitoring in enclosed spaces such as ship cargo holds and engine rooms to prevent explosions or poisoning incidents.
Selection
When selecting, confirm the types of gases to be detected, check the sensor lifespan and calibration cycle, and ensure that the protection level meets the requirements of the cabin environment. Consider the alarm method and battery life, verify the product's maritime certification standards, and choose between pump suction or diffusion sampling based on the usage scenario.

Terms

Standards

Instruments

Simultaneous measurement of pH, calcium ion, nitrate and other paraMeters, accuracy +/- 0.2 pH, Portable design to adapt to the marine environment, automatic recording of 200 sets of data, Protection Rating IP67.

$ 767.00

Imported Electrochemical sensor, detection accuracy ≤ +/- 1%, Response Time ≤ 20 seconds; Support 1-5 kinds of gas detection at the same time, built-in powerful air pump, with Data storage and Temperature Humidity detection function.

$ 716.00

Using 8-bit micro control technology, Response Time is less than 60 seconds, equipped with 12864 point array LCD display gas concentration, with sound, light and vibration triple Alarm mode, Protection Rating up to IP65.

$ 235.00

Semiconductor Sensor to detect halogen gas leaks of less than 0.5 oz/year, Response Time ≤ 1 second, Sensitivity adjustable, Portable design weighing 250g, up to 9 hours of operation.

$ 109.00

It can detect halogen gas leaks of less than 0.5 ounces per year, with an instantaneous Response Time and a Warm-Up Time of less than 90 seconds. It features automatic warm-up and battery protection, and a portable design weighing only 480 grams.

$ 154.00

Measurement range 1000 to 1800ppm, accuracy +/- 5%, using calcium mgstone indicator to adapt to Colorimetric EDTA method, the reaction makes the sample blue to purple, easy to operate.

$ 243.00

Electrochemical sensor, detection range 0~ 250ppm, resolution 1ppm, with sound, light, vibration triple Alarm mode, IP65 Protection Rating, support Data storage and flashlight function.

$ 235.00

Detect NH3 gas, range 0~ 100ppm, resolution 0.1ppm, Response Time T90 ≤ 120s, support sound and light alarm, Operating temperature -10~ 50 ℃, Working time for more than 60 hours, Portable design weighs only 170 grams.

$ 328.00

Electrochemical sensor, detecting phosphating hydrogen gas, range 0-20ppm, resolution 0.1ppm, with sound, light, vibration triple alarm, IP65 Protection Rating, suitable for harsh environments.

$ 235.00

Electrochemical sensor, formaldehyde detection range 0-20ppm, resolution 0.1ppm, with sound, light, vibration triple alarm, IP65 Protection Rating, built-in 1500mAh lithium battery can work continuously for 8 hours.

$ 235.00

Instantaneous Response Time Less than 6 seconds warm-up, can detect 3 g/year Sensitivity halogen refrigerant, 405 g lightweight design with 5 hours continuous Working time, with automatic warm-up and two-color LED charge indication function.

$ 140.00

Detection of oxygen concentration 0~ 25% range, resolution of 0.1%, Response Time ≤ 15 seconds, Portable design, suitable for a variety of environment monitoring needs.

$ 162.00

Using 8-bit microcontroller, Response Time is less than 30 seconds, with IP65 Protection Rating and sound and light vibration alarm function, support 1000 sets of alarm record storage.

$ 235.00

Using 8-bit micro-control technology, Response Time is less than 60 seconds, with IP65 waterproof level, can store 1000 sets of alarm records, support sound, light and vibration triple Alarm mode.

$ 145.00

Electrochemical sensor, resolution up to 0.1ppm, Response Time less than 60 seconds, with sound, light and vibration triple alarm, IP65 Protection Rating to adapt to harsh environments.

$ 235.00

Articles