Hydraulic automatic pull-off test, the pull-off speed is stable and controllable, the accuracy is +/- 1% full scale, equipped with pull-off kit size 10-50mm, built-in rechargeable battery and 200,000 Data storage.
Maximum load 0.5KN, specially designed for pull ring samples, compact structure, easy installation, suitable for tensile testing of a variety of materials, providing reliable data support.
Portable design built-in lithium battery, 0-3000p range accuracy +/- 1%, equipped with 10-50mm pull-off spindle, automatic calculation of pull-off force without conversion table, aluminum alignment unit to ensure uniform testing.
Using rigid polyester plate with foam rubber cushion, size 240x340mm, can absorb operating pressure, improve proofing Repeatability and uniformity, suitable for a variety of substrate testing.
The total film width of 90mm is divided into 10 gaps, the depth is gradually increased by 25μm, and the spacing is 1.5mm. The removable guide plate design is easy to operate on different thickness test panels.
Adopt double guide Rod structure to ensure Stability, Maximum Measured value 5000N, Travel 220mm, support stepless speed regulation and a variety of test modes, with pull-off stop and force retention functions.
Using brushless DC motor to achieve stepless speed regulation of 0~ 2000rpm, aluminum alloy heating plate Power 600W rises rapidly, temperature control accuracy +/- 1 ℃, heating plate temperature can be directly set and with safety restrictions.
Designed with 90mm application width and 25μm Graduation, with removable guide plate to ensure direct stretching, the sagging index is assessed through 10 aliquots, meeting ASTM standards.
Adopt low-noise stepless speed regulation motor, with a speed range of 0-500mm/min, with force holding function and four test modes, equipped with limit protection device, support pull-off stop and set force value round-trip motion.
Four-speed proofing speed is optional, up to 45m/min, using flat engraving plate for direct printing, supporting 95 × 149mm concave sample range, suitable for fast proofing of flexible substrates.
Hollow self-resetting hydraulic cylinder design, maximum pull-out force 40kN, central aperture 18mm, digital pressure Gauge directly read the force value and with storage query function, simple operation suitable for on-site use.
Grinding hard chrome metal pressure plate, adjustable temperature range -10~ 80 ℃, equipped with 10 point temperature transducer, through drying air flow to prevent condensation, ensure test repeatability, in line with a number of international standards.
Using electromagnetic force equilibrating Sensor, accuracy of 0.01mN/m, support platinum plate and platinum ring method, automatic measurement without calculation, real-time display Linear dispersion and save the results.
Equipped with 0.4ml × 96 well coagulation plate, Oscillation Frequency from start to 3000rpm, swing amplitude 6mm, support timing function, suitable for uniform mixing of trace samples.
Maximum pull-out force 50kN, center aperture 18mm, hollow self-resetting digital display integrated structure, can directly read the force value, with peak holding, storage, backlight and automatic shutdown functions, simple and reliable operation.
