It is suitable for measuring the viscosity of coatings with an outflow time of not less than 20 seconds. The length of the flow hole is 14 +/- 0.02mm, and the diaMeter is 5.6mm. It is easy to operate and meets the requirements of national standards.
Measurement range 0-150 seconds, copper material is durable and in line with national standards, portable design is convenient for on-site rapid detection of Coating viscosity.
Made of stainless steel, nozzle diaMeter 2mm, Measurement range 50~ 60cst, suitable for workshop and laboratory rapid inspection of various fluid viscosity, easy operation and high repeatability.
Applicable to the flow time of not less than 20 seconds viscosity measurement, using aluminum material, capacity 50ml, flow hole diaMeter 5.6mm, can be converted into kinematic viscosity.
The bottom hole and tip design are adopted, and the outflow time is determined by observing the appearance of the tip, which realizes rapid viscosity measurement and is suitable for on-site testing needs.
The outflow aperture is 4mm, the outflow time is 0~ 150s, and the measuring hole is equipped with a switch for easy operation to ensure the accuracy of measurement and meet the GB/T1723 standard.
7Mm diaMeter outflow hole design, made of stainless steel, can be adapted to DIN viscosity Cup to achieve different test requirements, in line with the approximate DIN53211 standard specification.
Adapt to a variety of Viscometer use, suitable for factory field applications, real-time printing measurement results, no need to hand copy, easy operation, can save labor time.
Benchtop structure design, the upper cylinder and the lower cone, the diaMeter of the flow hole is 4 mm, the outflow time range is 0 to 150 seconds, and the metal material shall prevail to ensure the measurement accuracy.
Using 4mm flow hole and chrome-plated Cup structure, the outflow time range is 0-150 seconds, and the correction factor K = 1 +/- 0.03 ensures accurate and reliable viscosity measurement.
Using stainless steel material, diaMeter 3mm outflow hole design, can freely replace the filter, expand the viscosity Cup test range, suitable for different liquid viscosity measurement needs.
The test program can be uploaded to the Viscometer host, the analysis record data can be collected, the rheological Linear dispersion and Excel can be generated, and five sets of data can be plotted and compared at the same time.
Measurement accuracy of 0.1 ℃, range of 0~ 100 ℃, real-time display of temperature values, suitable for a variety of Viscometer models, to ensure a stable test environment.
Silicone oil standard solution, calibrated viscosity 380cp, capacity 400ml, suitable for Viscometer calibrating.
Measurement accuracy +/- 2%, equipped with 5 calibrated oils to ensure measurement accuracy, as a special accessory for cone-plate viscoMeter to achieve stability testing.
