Suitable for a variety of Corrugated Board adhesive strength test, equipped with different specifications of steel needles, needle diaMeter range 1.0-3 mm, support A, B, C, E corrugated test, sample size 25 × 80mm.
With two test stations, the load range is 50~ 1000g, and three typical wear resistance tests of alcohol, eraser and pencil can be carried out, which is suitable for wear resistance evaluation of various coatings and materials.
Irreversible discoloration record historical temperature, accuracy +/- 1 ° C to +/- 4 ° C, oil, water and steam resistance, self-adhesive design for easy installation and storage.
It can precisely control the wet-film or dry-film thickness, providing a variety of film thickness options of 100-400μm, Spreader width 80mm, using wear-resistant and corrosion-resistant alloy steel material to ensure coating conformity and Repeatability.
Rotation speed 40rpm and roller diaMeter 150mm design, suitable for a variety of resilience material testing, abrasion Travel 40mm, test load optional 5N or 1N, to ensure efficient and accurate wear performance evaluation.
Double station design can simultaneously carry out two sets of tests, round trip 0-50mm adjustable, test load 80-990g adjustable range, equipped with a variety of weight to meet the wear resistance performance evaluation requirements under different load conditions.
Can cut 25 * 100mm sample, sampling error +/- 0.5mm, sampling thickness range of 18mm, fast and accurate completion of Corrugated Board Edge Crush Test and adhesive strength test sample preparation.
Made of wear-resistant and corrosion-resistant alloy steel, the film width is 80mm, and four film thickness options of 250/500/700/1000μm are provided, which can precisely control the wet-film or dry-film thickness to ensure coating conformity and Repeatability.
The equipment tests the initial Tack by short contact between steel ball and adhesive tape sample at a small pressure, adjustable tilt angle 0~ 60 °, rolling ball range 1/32 inch to 1 inch, suitable for a variety of material adhesion evaluation.
Irreversible discoloration record historical temperature, Measurement accuracy +/- 1 ℃ to +/- 4 ℃, oil and water vapor resistance, self-adhesive design for easy installation, Instant Response.
Spreader width 100mm, wet film thickness 200μm, high-quality wear-resistant corrosion-resistant alloy steel material, can be manually or automatically film, support non-standard customization, suitable for a variety of material coating preparatory and performance testing.
With no-segment adjustable Friction Frequency, speed range of 60 times/minute, support 10-50mm friction distance free adjustment, mirror stainless steel material, provide a variety of clamping and wear mode, power failure memory function to ensure test continuity.
Provides irreversible temperature recording with accuracy of +/- 1 ° C below 100 ° C and +/- 1.5 ° C from 100 ° C to 154 ° C. Self-adhesive design, resistant to oil, water and steam, ensures reliable monitoring.
Spreader width 100mm, wet film thickness 400μm, wear-resistant corrosion-resistant alloy steel material, can be used manually or with automatic Film Applicator, suitable for preparing uniform film coating to test performance.
Irreversible discoloration design, temperature accuracy 50 ℃, circular single grid structure, specification 2x2cm, Pressure sensitive adhesive to ensure firm paste, suitable for temperature monitoring in harsh environments.
