Simultaneous sampling ECT (100 * 25) mm and PAT (80 * 25) mm two sizes, sampling error +/- 0.5mm, thickness range ≤ 10mm, easy to operate.
Sampling size 25.4mm * 140mm, thickness range 0.05~ 1.2mm, parallelism of two long sides ≤ 0.015mm, to ensure High Accuracy sampling, Improve Test Reliability.
With 0.001 pH high resolution and automatic temperature compensation, it supports six sets of buffer identification and GLP/GMP specification data traceability, and can realize batch detection by connecting to Automatic sampler.
The sampling area is 100mm ² and the error is controlled within +/- 0.35cm ², which can handle 0.1~ 1.2mm Film thickness materials. The circular sampling design is used to ensure the standard of the sample, and the operation is simple and the results are reliable.
High sampling accuracy, parallelism ≤ 0.015mm, thickness range of 0.1~ 1.2mm, suitable for a variety of paper strength tests to ensure accurate and reliable detection data.
Sampling area 100cm ², error +/- 0.35cm ², stamping sampling method, suitable for 0.1~ 1.0mm thickness materials, to ensure accurate sample standards.
The bearing with accurate guidance and reasonable fulcrum structure, good sampling Repeatability, can handle materials with a thickness of 0.1-1 mm, support 70 * 38mm fold stiffness and 38 * 36mm crease stiffness two sizes, long side parallelism ≤ 0.015mm.
The linear guide is used to ensure smooth and fast sampling, and the imported tungsten sheet is cut without burrs and durable. It supports 18mm thickness sampling, and can cut 25 × 100mm and 25 × 80mm samples.
The sampling area is 100cm ², the sampling error is +/- 0.35cm ², the sampling thickness range is 0.1-3 mm, and the special treatment die blade is durable and free of replacement.
Precision combination of cutting edge to ensure that the sample edge flat, especially for ring pressure test design, can cut standard samples, easy to operate, cutting effect is good.
The stamping sampling structure is simple and firm, the knife edge is quenched, the sampling is labor-saving and accurate without burrs, the sampling thickness range is 0.1~ 1.0mm, and the sampling size error is 125mm +/- 0.2mm.
Using Taiwan SDI blade and Japan SK4 high carbon steel material, sharp and durable; sampling accuracy +/- 0.5mm, thickness range ≤ 10mm; novel design, flexible sampling standardization, less burrs.
The punching sampling method ensures accuracy, the sampling size error is controlled within 0.1mm, and two specifications of 70 * 38mm stiffness and 36 * 38mm crease stiffness are supported.
Thrust sampling mode, cutting edge pressure sample 25mmx100mm and gluing sample 25mmx80mm, sampling thickness range of 18mm, suitable for Corrugated Board and carton mass detection.
The stamping sampling method is accurate and convenient, the quenching tool is resistant to abrasion, the sampling error is +/- 0.2mm, the sampling thickness range is 0.1-1 mm, and the special treatment blade can be used normally for 10 years.
