The wet film thickness can be as low as 1.5μm to achieve ultra-thin Spreader; the bottom of the groove is wider, and the Coating Weight is larger; the extrusion process is adopted to avoid the problem of loose wire and broken wire, and it is easy to clean.
Using extrusion process and chrome plating surface, the wet film thickness can be as low as 1.5 μ m, and the groove design is wide to improve the Coating Weight, which solves the problem of traditional steel wire loosening and cleaning difficulties, and realizes stable ultra-thin Spreader.
Adopting a wire-wound process, with a wet film thickness of 9.1 microns and a coating width of 300mm, it is suitable for ultra-thin coating requirements, offering high precision and ease of operation.
Wet film thickness can be as low as 1.5μm, support ultra-thin Spreader; use extrusion process and chrome plating surface to reduce clogging and disconnection problems, groove design to optimize Coating Weight, adapt to a variety of substrate needs.
Using formed pRoduction process, wet film thickness 0 μ m, film accuracy of 1 μ m, special groove structure to ensure uniform Spreader and easy to clean.
Echo-echo technology implementation of 0.15mm ultra-thin part measurement, resolution of 0.001mm, can penetrate 0.5mm coating measurement substrate Film thickness, support sound speed calibrated and difference mode settings.
Linear dispersion surface is formed by cold extrusion processing technology, no risk of wire loosening, wet film thickness 50 μ m, can achieve ultra-thin film Spreader, smooth surface and easy to clean.
Adopting the formed preparation 1.5μm wet-film, stainless steel material is durable and easy to clean, suitable for a variety of Coating and chemical fields, application width 60mm.
Wet film thickness 1.5μm, formed pRoduction process and 304 stainless steel material, to ensure that the Spreader uniform durability, suitable for a variety of Coating application scenarios.
Wet film thickness can be controlled 1.5μm, the bottom of the groove is wider Coating Weight is larger, using extrusion process and chrome plating surface, not easy to block and easy to clean.
Using extrusion process and 304 stainless steel material, the wet film thickness can be controlled by 1.5μm, and the bottom of the groove is wider to increase the Coating Weight, so as to avoid the problem of steel wire loosening and blockage.
Using extrusion process and 304 stainless steel material, the minimum wet film thickness is 1.5μm, the bottom of the groove is wider, the Coating Weight is larger, it is not easy to block and easy to clean, and the length can be customized.
Spreader formed process ensures uniform, wet film thickness of only 1.5μm, to achieve ultra-thin film; stainless steel material is durable and easy to clean, suitable for precision Spreader applications.
Using extrusion process and chrome plating surface, the minimum wet film thickness is 1.5μm. The wide groove design improves the Coating Weight, avoids the problem of steel wire loosening and blockage, and is easy to operate.
Using extrusion process and chrome plating surface, the minimum wet film thickness can be controlled by 1.5 μ m, the bottom of the groove is wider and the Coating Weight is large, it is not easy to loosen and break the wire and is easy to clean.
