The MCU chip is used to achieve low power consumption operation, the detection error is ≤ +/- 3% F.S, and the Response Time is ≤ 30S. It has an explosion-proof structure, supports a variety of signal output and wireless transmission, and can be operated by remote control without opening the lid. The aluminum alloy shell is sturdy and durable.
Conductivity Detector temperature compensation technology, Measurement range 8~ 40%, accuracy +/- 0.5%, Response Time 1 second, with backlight display and automatic shutdown function, portable design weight only 175 grams.
Measurement range 0.00~ 14.00, accuracy +/- 0.05, Stability +/- 0.03, support 0~ 60 ℃ temperature compensation, portable and lightweight only 205g, suitable for a variety of environments.
Platinum Sensor provides linearly stable measurement results, Conductivity Detector cell constant K = 10, Measurement range 0 to 200mS/cm, suitable for high Conductivity Detector liquid detection.
Conductivity Detector measurement principle, measurement range 0~ 95%, resolution of 0.1%, Response Time of only 1 second, with temperature compensation and automatic shutdown function, portable design weight of about 175 grams for on-site use.
Conductivity Detector measurement principle, measurement range 0~ 84%, accuracy +/- 0.5%, Response Time 1 second, with temperature and humidity compensation technology, portable design weight only 265 grams, suitable for on-site rapid detection.
Conductivity Detector cell constant K = 0.1, built-in temperature sensor real-time sensing sample temperature, suitable for low Conductivity Detector liquid measurement.
Detection of oxygen concentration 0~ 25% range, resolution of 0.1%, Response Time ≤ 15 seconds, Portable design, suitable for a variety of environment monitoring needs.
Conductivity Detector Measurement principle, Measurement range 8~ 40%, accuracy +/- 0.5%, Response Time only 1 second, with temperature and humidity compensation technology, probe Sensor can be deeply measured inside the material, support multi-gear design and Interface customization.
Measurement principle using Conductivity Detector method, Measurement range 8~ 40%, accuracy +/- 0.5%, with automatic compensation function of Temperature and Humidity, Response Time is only 1 second, Portable design weight about 203 grams, suitable for on-site rapid detection.
Instantaneous Response Time Less than 6 seconds warm-up, can detect 3 g/year Sensitivity halogen refrigerant, 405 g lightweight design with 5 hours continuous Working time, with automatic warm-up and two-color LED charge indication function.
Electrochemical sensor, formaldehyde detection range 0-20ppm, resolution 0.1ppm, with sound, light, vibration triple alarm, IP65 Protection Rating, built-in 1500mAh lithium battery can work continuously for 8 hours.
Electrochemical sensor, detection range 0~ 250ppm, resolution 1ppm, with sound, light, vibration triple Alarm mode, IP65 Protection Rating, support Data storage and flashlight function.
Four-ring Conductivity Detector Probe with three Measurement ranges (0.0 to 199.9 mg/L, 0 to 1999 mg/L, 0.00 to 19.99 mg/L), manual temperature compensation and single point calibrating ensure easy operation and accurate measurement in different environments.
Using 8-bit microcontroller, Response Time is less than 30 seconds, with IP65 Protection Rating and sound and light vibration alarm function, support 1000 sets of alarm record storage.
