Supporting D-type Shore DuroMeter, applying 5kg test force by weight, equipped with Glass bench and adjusting nut to ensure full contact with the sample and improve measurement Stability.
Can be used with A type or C type Shore DuroMeter, fixed load weight mass 0.75 +/- 0.05kg, hardness Gauge clamping Rod connection size M7x0.5mm, improve hardness testing accuracy and Stability.
Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
Double pointer design for easy reading, Pin Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, lightweight and portable only 0.16kg, suitable for on-site Hardness detection.
Pin Travel 0~ 2.5mm, Measurement range 0~ 100HA, Error +/- 1HA, Dual pointer design can display real-time and peak Hardness value at the same time, easy to use handheld or rack.
With a 45 ° test angle and an adjustable speed of 5mm/sec, equipped with a 500g weight and a standard pencil set, stable and low-noise electric control is achieved through a stepper motor.
Measurement range is 0~ 100HA, resolution up to 0.1HA, measurement error ≤ +/- 1HA (20-90HA), Ambient Temperature 0~ 40 ℃, Dimension 173 * 56 * 42mm, weight 233g, support RS232 communication cable.
Rotation speed of 10000rpm is achieved by using 750W three-phase asynchronous motor, and the electric lifting platform supports 300mm Travel, which can handle 10L materials and work continuously for a long time.
Measurement range 20~ 90A, with MAX Maximum latch, under-voltage alarm and male/imperial unit conversion function, support USB and Bluetooth data output.
Resolution 0.1H, Accuracy ≤ 1H, Measurement range 10~ 90 HA/HD; Integrated design is lightweight, supports male/imperial conversion, average calculation and a variety of data output methods.
Mirror stainless steel liner and electric heating film heating, Temperature Uniformity +/- 1 ℃, heating speed, double-decked door design to reduce heat loss, four corners arc easy to clean.
Equipped with a 1kg fixed load weight, pressing the specimen at a speed of 3.2mm/s, providing stability testing conditions, suitable for standard Hardness measurement, preventing vibration from affecting the results.
Measurement range greater than 90B and less than 20D, with MAX Maximum latch, automatic shutdown and USB/Bluetooth data output functions, the error does not exceed 1H.
Double pointer design can be used with rack or hand, pressing needle Travel 0-2.5 mm, measurement error +/- 1HA, suitable for rubber and plastic hardness testing.
Using 4000W three-phase asynchronous motor, Speed range 0-2800rpm, equipped with a variety of stator heads to adapt to different material viscosity, electric lift Travel up to 700mm, support long-term operation with low temperature rise.
