Hydraulic system measurement coating adhesion, accuracy control within +/- 1% full scale, optional 10mm to 50mm more than the kit size, self-positioning characteristics to ensure smooth rough surface measurement results accurate and reliable.
Hydraulic system for coating detachment measurement, accuracy of +/- 1% full scale, optional 10mm to 50mm spindle and self-positioning function, suitable for smooth rough surfaces without affecting the results.
Hydraulic system measurement coating adhesion, accuracy +/- 1% full scale, optional 10-50mm kit, self-positioning characteristics on smooth rough surfaces do not affect the results, Portable design without external power supply.
Hydraulic system to achieve the measurement of coatings, accuracy control within +/- 1%, with self-positioning kit design, optional 10mm to 50mm kit size, Portable structure is suitable for all kinds of places.
Hydraulic system measurement coating adhesion, accuracy control within +/- 1% full scale, equipped with multi-function digital display, can automatically calculate different kit size results, self-positioning kit to adapt to various surfaces.
The fully automatic electronically controlled hydraulic pump provides smooth and continuous pulling force with +/- 1% accuracy, built-in rechargeable battery supports 200 tests, and IP65 Protection Rating ensures durability.
Hydraulic automatic pull-off test, the pull-off speed is stable and controllable, the accuracy is +/- 1% full scale, equipped with pull-off kit size 10-50mm, built-in rechargeable battery and 200,000 Data storage.
Measurement range of 0.7~ 20MPa, accuracy of +/- 1%, equipped with self-alignment positioning kit for accurate measurement on rough surfaces, in line with ASTM D4541 and other international standards.
Using DFD ® technology to ensure the true record of coating strength, the maximum tensile force of 6.3kN, accuracy +/- 1% F.S, self-adjusting feet to ensure 90 ° pull-off, light alloy structure weighs only 1.25Kg.
Hydraulic system measurement coating adhesion, accuracy control within +/- 1%, equipped with self-positioning kit to ensure smooth and rough surface measurement results consistent, optional 10mm to 50mm variety of kit specifications.
Electronically controlled hydraulic pump automatically generates smooth pulling force, maximum range 560psi, accuracy +/- 1%, IP65 Protection Rating, built-in memory can store 100,000 data, support a variety of kit specifications to adapt to different testing needs.
Hydraulic pump is used to uniformly pull off the test column, the speed does not exceed 1MPa/s, the test force is directly displayed by liquid crystal, and the adhesion failure and cohesion failure can be distinguished, with an accuracy of +/- 1% F.S.
Tack is good and non-degumming, adhesion reaches 7.6 N/cm, mass performance is stable, suitable for cross-cut adhesion testing, to ensure accurate film integrity assessment.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
Made of stainless steel, the cutter tooth spacing is 1-3mm, the cut mark length is 35mm, and the coating is cut through the grid pattern, and the adhesion effect is evaluated according to the six-level classification, which is suitable for a variety of surface tests.
