Made of wear-resistant and corrosion-resistant alloy steel, the effective Spreader width is 100mm, and the wet film thickness is 75μm. Coating thickness can be precisely controlled to ensure conformity and Repeatability, and manual or automatic film is supported.
Effective Spreader width 100mm, wet film thickness up to 600μm, high-quality wear-resistant corrosion-resistant alloy steel material, support manual film or with automatic Film Applicator to ensure good conformity Repeatability coating.
With 450 +/- 2g brush weight and 300mm scrubbing Travel, scrubbing speed 37 +/- 2cpm, can accurately test the anti-scrubbing performance of coatings, suitable for interior and exterior wall coating inspection.
Spreader width 100mm, wet film thickness 40μm, wear resistant corrosion resistant alloy steel material, can be manually operated or with automatic Film Applicator to ensure coating conformity and Repeatability.
Spreader width 100mm, total length 130mm, wear-resistant corrosion-resistant alloy steel material, can be manually or automatically film, suitable for a variety of materials Preparative uniform film coating.
Measurement principle using ultrasonic, Measurement range 13~ 1000μm, accuracy +/- (2μm + 3%), suitable for wood, plastic and other substrates polymer Coating thickness detection.
Manufactured using a wire-winding process, with a wet film thickness of 41.1 μm and a coating width of 300 mm. Made of durable stainless steel, it is suitable for preparing thin coatings on various soft materials.
Wet film thickness 137.2 μm, coating width 300 mm. The wire-wound structure enables the preparation of uniform coatings on both flat and easily raised substrates, while the two-end hand grip design facilitates even force distribution during operation.
Spreader width 100mm, wet film thickness 60μm, high-quality wear-resistant corrosion-resistant alloy steel material, manual film can also be equipped with automatic Film Applicator, support non-standard customization.
304 stainless steel material, wet film thickness 8 μ m, application width 300mm, formed pRoduction process to ensure uniform coating and continuous wire.
Using open ceramic core liquid complex design, with solid polymer reference system, Measurement range 0~ 14pH, Temperature range 0~ 80 ℃, Membrane Impedance lower than 250MΩ, to ensure Stability and long life.
With open liquid network design, equipped with solid polymer reference system, Measurement range 0-14pH, Temperature range 0-80 ℃, to ensure long-term Stability and anti-pollution ability.
Using open liquid complex structure, equipped with solid polymer reference electrolysis solution, the membrane resistance is less than 200MΩ, suitable for -5~ 80 ℃ wide temperature environment, to ensure long-term stable measurement.
Using the magnetic induction method, the measurement range is 0~2000 μm, with an error of ±5%, a resolution of 0.1 μm. It supports separate probes and low-voltage alerts, and is suitable for various types of coatings.
With bar and drawdown blade two coating methods, Spreader thickness range 0~ 10mm, coating speed 5~ 200mm/s, support stepless speed and automatic feeding customization function.
