High Accuracy coaxial concentric structure is realized by three-point positioning method, the sampling error is +/- 0.2mm. The blade can be used for a long time after special treatment, and is suitable for materials with thickness of 0.1~ 1.5mm.
The three-point contact design ensures that the pencil and the test surface always maintain a 45 ° angle, the standard 6B-6H pencil covers the complete Hardness range, the mechanical structure is easy and reliable to operate, and it is suitable for a variety of coating hardness testing needs.
Measurement accuracy +/- 0.1pH, support three-point calibrated, built-in ElectRode design, compact and easy to carry, suitable for outdoor water quality testing, simple and reliable operation.
Microprocessor controlled, with 0.1-14 pH Measurement range and +/- 0.1 pH accuracy, support for three-point calibrate and temperature compensation, portable design weighing only 88g, suitable for on-site rapid detection.
The three-point contact structure is used to ensure stable sliding, the test angle is fixed at 45 °, and the 500/750/1000g adjustable load is equipped. The coating Hardness is accurately judged by the scratch depth of different Hardness pencils.
With PH, ORP and temperature three-paraMeter measurement function, support three-point correction and automatic temperature compensation, Measurement accuracy of +/- 0.02pH, rugged structure, easy to monitor on site, manually record 99 sets of data.
Sampling thickness range 0.1~ 1.2mm, folding stiffness 70x38mm, crease stiffness 36x38mm, parallelism on both sides ≤ 0.015mm, suitable for stiffness testing.
It can cut 70 × 38 and 38 × 36 samples, and the sampling thickness range is less than or equal to 1mm. It is suitable for special sampling equipment for stiffness and crease detection, and is used with a variety of stiffness Meters.
The pencil scratch method is used to test film Hardness, and the three-point contact design always guarantees a 45 ° angle, which meets the GB6379 standard and is suitable for film Hardness detection in laboratories and construction sites.
It can measure the anti-bending stiffness of the material with a thickness of 0-3mm, the test angle is adjustable from 1-90 °, supports 6 kinds of bending lengths and 3-30 seconds time settings, adopts digital motor control and displays the stiffness time in real time Linear dispersion.
Using 70 * 38mm standard sampling size, the thickness range covers 0.1-1 mm, the parallelism of the two long sides is controlled within 0.015mm, and the crease stiffness sampling size is 38 * 36mm, which improves the accuracy of the stiffness test data.
The punching sampling method ensures accuracy, the sampling size error is controlled within 0.1mm, and two specifications of 70 * 38mm stiffness and 36 * 38mm crease stiffness are supported.
The bearing with accurate guidance and reasonable fulcrum structure, good sampling Repeatability, can handle materials with a thickness of 0.1-1 mm, support 70 * 38mm fold stiffness and 38 * 36mm crease stiffness two sizes, long side parallelism ≤ 0.015mm.
Using two-point static bending method, Measurement range covering 0~ 5000mN, indication Precision up to +/- 1%, support 0~ 90 ° bending angle adjustable, Test speed 200 °/min, suitable for materials with thickness less than 2mm.
Angle 1-90 degrees adjustable, test time 3-35 seconds can be set, Measurement range 15-10000mN.m, equipped with 5.7 inch LCD real-time display stiffness time Linear dispersion, support automatic zero adjustment and Data analysis.
