The equipment adopts international standards, the papermaking diaMeter is 300mm, the capacity is 8 liters, and it is equipped with manual pulp plate and optional vacuum papermaking function.
The equipment adopts white water circulation system, equipped with electric sizing and aeRodynamic bubble homogenizing functions, the diaMeter of the extraction cylinder is 200mm and the capacity is 8 liters. It supports external vacuum suction, and the volume is small and easy to move.
Adopt 4mm small diaMeter design, suitable for surface or small area measurement; Repeatability Delta E * ab < 0.05 to ensure Measurement accuracy; Horizontal structure is small in size, comfortable and stable to hold.
Maximum load 0.5KN, designed for small force test, compact structure, easy operation, ensure test Stability and Repeatability.
Using swirl/spin design, light weight and easy to move, can effectively improve the Measurement accuracy and prevent the instrument from falling, suitable for small workpiece measurement scenarios.
Impact energy 2.7mJ, Impact device mass 75g, small damage to the measured surface, does not damage the hardened layer, suitable for measurement of small and thin parts, the minimum thickness of the specimen is 1mm, and the minimum depth of the hardened layer is 0.2mm.
Maximum load 0.5KN, compact structure, reliable clamping, suitable for a variety of small sample testing, easy to operate.
Adopt small hydraulic force measuring device, drawing force up to 40KN, cylinder Travel 10mm, with a machine multi-purpose, novel structure, compact size, complete functions and other characteristics, high detection accuracy, support strength Mpa and force value KN two Measurement mode.
The line pressure range is 0.33~ 80N/mm, and the width of the pressing roller is 300mm, which can complete ordinary pressing, high-pressure pressing, smooth pressing and calendering experiments, and support a variety of blanket pressing tests.
Support 10-20mL small sample testing, viscosity range 80-40000000mPa · s, equipped with a dedicated rotor for High Accuracy measurement, Thermostatic Bath connection can control the sample temperature.
The equipment can perform continuous rotary drop test, drop height up to 1000mm, Test speed 5-20 times/min, suitable for Reliability verification of small electronic pRoducts.
The measurement aperture is only 1mm, which can accurately measure small or special-shaped surfaces. The repeability is ≤ 0.03, and the accuracy is high. With split design, Probe can flexibly align or invert measurement, and the operation experience is good.
Impact energy is only 2.7mJ, minimal damage to the measured surface, does not damage the hardened layer, suitable for testing 1mm thickness of small parts, Cedar diaMeter minimum 0.32mm.
Rotation speed stable and no temperature rise, Max. stirring Capacity 3L, Speed range 0~ 1500rpm, suitable for small capacity single stirring needs.
Using coaxial cylinder structure, the sample volume is only 7-13ml, the Measurement accuracy is +/- 2%, equipped with timing function and RS232 interface, suitable for small sample testing.
